Connector board for FPGA transmitt

### DESCRIPTION ( Introduce yourserlf and your project)

Hello!

I am an FPGA enthusiastic and nowadays I am trying to make an transmitter which uses optical interface. 

I have an FPGA evaluation board, and I am trying to use it as a transmitter. The evaluation board has 1 SFP+ connector yet I need 8 in total. So I have designed a PCB which converts the MOLEX backplane connector to 7 different SFP+ connectors. The purpose is to be able to convert 8 electrical channels of the FPGA to optical channels. Evaluation board has 1 SFP+ connector as I mentioned before.

### TECHNICAL DETAILS (With project photos)

I am using SFP+ to convert electrical signal to optical signal then I transmit them via optical fiber.

Picture of the Evaluation board

A picture of SFP+ module.

Picture of the female Molex Connector at the FPGA evaluation board and the Picture of the male Molex Connector which will be mounted to the PCB I have designed.

A picture of SFP+ cage which will be mounted to the PCB.

### Words to PCBWay

I have been looking for different PCB suppliers for a long time and I think  finally i have found one I can trust. I have already suggested your company to many of my friends. 

Please let me have 8 Optical channels with your sponsorship PCBWAY =).

Best Regards

Ibrahim Sezgin