An undesirable protrusion of solder from a solidified solder joint or coating.
Shiny Li
Jan 28,2016
1946 views
Finely divided particles of solder, with additives to promote wetting and to control viscosity, tackiness, drying rate, etc.
Shiny Li
Jan 28,2016
1212 views
Liquid formulations that are used in intermix wave soldering and as coverings on static and wave soldering pots in order to eliminate dross and to reduce surface tension during the soldering process.
Shiny Li
Jan 28,2016
1011 views
Coating with mask and insulate areas of a circuit pattern where solder is not desired.
Shiny Li
Jan 28,2016
1964 views
A screening defect characterized by prints having jagged edges, the result of incorrect moving pressure.
Shiny Li
Jan 28,2016
925 views
The process of immersing printed circuit boards into hot liquids. Often referred to as HASL or HAL (Hot Air Levelling).
Shiny Li
Jan 28,2016
960 views
A preferable concave surface of solder that is at the interconnection of the metal surfaces of a solder connection.
Shiny Li
Jan 28,2016
1257 views
A small hole that penetrates from the surface of a solder connection to a void of indeterminate size within the solder connection (process indicator).
Shiny Li
Jan 28,2016
1082 views
The unwanted formation of a conductive path of solder between conductors.
Shiny Li
Jan 28,2016
932 views
A metal alloy with a melting temperature that is below 450℃.
Shiny Li
Jan 28,2016
872 views
The period after pre-heat and before re-flow peak temperature where the internal temperature differences between parts allowed to equalize.
Shiny Li
Jan 28,2016
1050 views
The return of a stencil to normal level after deflection by the pressure of the squeegee moving across the surface.
Shiny Li
Jan 28,2016
1364 views
The space between the top surface of the substrate and the underside of the stencil when the squeegee is not in play.
Shiny Li
Jan 28,2016
1223 views
Surface Mount Technology. Defines the entire body of processes and components which create printed circuit assemblies without components with leads that pierce the board.
Shiny Li
Jan 28,2016
926 views
Resin, smeared over the edge of an internal copper layer of a multi-layer board during drilling, which prevents the layer from making electrical contact with the barrel of the hole.
Shiny Li
Jan 28,2016
2098 views
Surface Mounted Device. Any component or hardware element designed to be mounted to a printed circuit board (PCB) without penetrating the board.
Shiny Li
Jan 28,2016
1065 views
A spreading of the solder paste after printing but before re-flow soldering. If excessive, a loss of definition may result.
Shiny Li
Jan 28,2016
1063 views
A production master used in the process of making a single printed board.
Shiny Li
Jan 28,2016
823 views
| Ranking | Name | Answers |
|---|---|---|
| 1 | PCBWay Team | 6 |
| 2 | Engineer | 1 |
| 3 | Stephen Newport | 1 |
