PCBWay
Dec 26,2013
Board Stack-Up-The Order of Layers
label: PCB layers,Printed-circuit-board There has been a lot of confusion in the past over what is the optimum order for PCB layers. Take, for example, a 4-layer board consisting of two signal layers...
PCBWay
Dec 26,2013
Multi-Layer
label: Multi-Layer PCB,Printed-circuit-board Double-sided boards, in spite of their benefits, are not the best method of construction, especially for sensitive or high-speed designs. The most common ...
PCBWay
Dec 26,2013
Double-Sided
label: Double-Sided PCB,Printed-circuit-board The next level of complexity is double-sided. Although there are some double-sided FR–2 boards, they are more commonly fabricated with FR–4 material. The...
PCBWay
Dec 26,2013
Single-Sided
label: Single-Sided PCB,Printed-circuit-board Very simple consumer electronics are sometimes fabricated on single-sided PCBs, keep-ing the raw board material inexpensive (FR–1 or FR–2) with thin copp...
PCBWay
Dec 26,2013
Circuit Board Layout Guidelines for White LED Charge Pumps
label: PCB Layout,Printed-circuit-board,PCB design Abstract: printed circuit board (PCB) layout is simple for many white-LED charge-pump ICs. But high-current charge pumps and those with many pins (s...
PCBWay
Dec 26,2013
Printed Circuit Board Layout and Routing
label: PCB Layout,Printed-circuit-board,prototype PCB Rapidly prototype printed circuit boards (PCBs) with Ultiboard. The flexible Ultiboard design environment accelerates design with automated funct...
PCBWay
Dec 26,2013
Effect of PC Board Trace Width on Remote-Diode Temperature-Sensor Accuracy
label: PC Board,Printed-circuit-board Abstract: Most remote-diode temperature-sensor data sheets recommend 10-mil PC board trace widths, and 10-mil spacing between traces for connecting the sensor to...
PCBWay
Dec 26,2013
PCB Layout Techniques to Achieve RF Immunity for Audio Amplifiers
label: PCB layout,Printed-circuit-board Abstract: PCB layout techniques are discussed as a method to optimize the RF immunity performance of an audio amplifier IC. Maxim's MAX9750 IC is highlighted a...
PCBWay
Dec 26,2013
High Current PCB designing
label: PCB design,Printed-circuit-board,PCB manufacturer High Current carrying Printed Circuit Boards require heavy copper or high thermally conductive dielectric. Before determining the copper weigh...
PCBWay
Dec 26,2013
Printed Circuit Board Identification Using 1-Wire Products
label: PCB design,Printed-circuit-board Abstract: There are two ways to identify a printed circuit board (PCB). The 'minimalist' approach is based on devices using ROM technology. The 'nameplate' app...
PCBWay
Dec 26,2013
Material selection for SERDES desgin
label: PCB design,Printed-circuit-board,multilayer PCB PCB designers and engineers faced many challenges when they are faced with new technologies. SERDES–high speed serial link transmission line los...
PCBWay
Dec 26,2013
IPC release new PCB library file and PCB pad standard IPC-7351
IPC-® and PCB Libraries recently put together a new version of the Association built library, and more powerful PCB construction tools, in support of the IPC-7351 surface mount design and land pat...
PCBWay
Dec 26,2013
High-end smartphones will reduce PCB line space
label: PCB design,PCB industry,Printed-circuit-board As smartphones and consumer electronics, increasing competition coupled with semiconductor manufacturing process in continuous evolution, allows c...
PCBWay
Dec 26,2013
Thermal Management of High-Frequency PCBs
label: PCB design,PCB industry, Printed-circuit-board Thermal Management of High-Frequency PCBs Thermodynamics can be a difficult enough subject to understand. But when combined with high-frequenc...
PCBWay
Dec 26,2013
Plated Half-holes
label: circuit board,pcb, Printed-circuit-board,PCB industry Plated half-holes are predominantly used for board-on-board connections, mostly where two printed circuit boards with different technologi...
Eric
Dec 26,2013
12 layers 4oz heavy copper PCB
label: circuit board,pcb, Printed-circuit-boardWhat's the heavy copper PCB?The finish copper of conventional single side is 0.5OZ, and the finish copper of double side is 1OZ. The multilayer out finis...
PCBWay
Dec 26,2013
4 layers Gold Finger PCB
label: circuit board,pcb, Printed-circuit-board What's the Gold Finger PCB?Contacts on the edge of a circuit board that plug into a mating connector. Gold Finger PCB is also called Gold Connector, ...
PCBWay
Dec 26,2013
2 layers flexible circuit board
label: circuit board,pcb, Printed-circuit-board 2 layers flexible circuit board is a circuit having two conductive layers, one on each side of the base layer of polyimide within the circuit. Trace ...
PCBWay
Dec 19,2013
Signal integrity and characteristic impedance
label: printed-circuit-board,PCB trace,PCB design Signal integrity and characteristic impedance Signal-integrity problems can present some interesting issues as you try to stabilize the signals acro...
PCBWay
Dec 12,2013
A Study in Printed Circuit Board Failure Analysis, Part 2
label: printed-circuit-board,PCB,PCB manufacturer Continued from A Study in Printed Circuit Board Failure Analysis, Part 1 The next step in the failure analysis process, revealing the defect, would ...
| Ranking | Name | Answers |
|---|---|---|
| 1 | PCBWay Team | 9 |
| 2 | weslley ramos | 1 |
| 3 | Epishko Dmitry | 1 |
