1 Introduction In the connector PCB plating , because exposure to have higher electrical performance requirements , gold plating process occupies an important position in the connector obvious PCB pl...
PCBWay
Jan 10,2014
2232 views
PCB circuit board plate hole circle of water lines occur: single board, full board, every hole, hole, water striate, like washing the residual liquid after natural drying condition of the impurity. P...
PCBWay
Jan 10,2014
1091 views
PCB circuit board design to engage people to understand that design is a product of the highest things tech . Design board considered the most troublesome cases making processes. While all this troubl...
PCBWay
Jan 10,2014
885 views
Aluminum PCB thermal design of electronic components inside the device temperature control, allowing the device in the environment as well as the maximum temperature does not exceed the standard speci...
PCBWay
Jan 10,2014
1205 views
With increasingly sophisticated consumer electronics products , as such products as the carrier board increasingly sophisticated consumer electronics products , such products as carrier board PCB boar...
PCBWay
Jan 10,2014
1055 views
printed circuit boards (PCBs) are by far the most common method of assembling modern electronic circuits. Comprised of a sandwich of one or more insulating layers and one or more copper layers which c...
PCBWay
Jan 09,2014
5635 views
pcbWay, PCB prototype and Fabrication the Easy Way! With more than a decade in the field of PCB prototype and fabrication, we are committed to meeting the needs of our customers from different indust...
PCBWay
Jan 09,2014
3645 views
Introduction to the printed circuit board (PCB) PCB top no standard parts, also often referred to as "the PCB Printed Wiring Board (PWB)". PCB we can see almost all electronic devices can not do w...
PCBWay
Jan 09,2014
2722 views
For multilayer circuit boards, the development leads to smaller vias and an increasing number of layers. The tighter manufacturing tolerances demand a reliable registration process of conductive patte...
PCBWay
Jan 09,2014
1246 views
Testing the layer offset with X-ray technology is very important in the manufacture of multilayer circuit boards. X-ray images are the best (and only) way to identify and correct layer displacements i...
PCBWay
Jan 09,2014
845 views
The A.O.I. test verifies the finished conductor trace image for deviations from the Gerber data and finds errors that the E-Test may not discover, such as (for example) narrowed, but still unbroken co...
PCBWay
Jan 09,2014
1672 views
A printed circuit board (PCB) mechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-cond...
PCBWay
Jan 09,2014
3819 views
The DRC is an in-depth review of your production data, which is carried out by our experienced CAM station engineers before production of your circuit boards even begins. The DRC is an extremely im...
PCBWay
Jan 09,2014
4047 views
The electronic test (E-Test) for circuit boards is performed after manufacture. Your circuit boards are checked with a flying probe, or for larger series using an adapter E-Test. The layout is analy...
PCBWay
Jan 09,2014
1225 views
SMD-Stencils are precision tools which have to comply with high requirements, as they take a key role in the SMT (surface mount technology) process. We offer following SMD-Stencils: Solder paste sten...
PCBWay
Jan 09,2014
1500 views
Last updated: August 2020Reason of failed review:A: The Space between IC pads should be at least 0.2mm if solder mask bridge for green soldermask needed of 1oz/2oz/3oz copper board.B: Space between IC...
PCBWay
Jan 09,2014
9818 views
Assembly of electronic products because of the large number of components , as well as a wide variety of electronic product life cycle is short and so on , to the production operation scheduling an en...
PCBWay
Jan 09,2014
1656 views
1 , electroplated nickel layer thickness control . We must say that the gold plating layer of black issues , we will discuss how the thickness of the nickel plating . In fact, PCB circuit boards are ...
PCBWay
Jan 09,2014
1284 views
Reason: 1 , did not pay attention to the fiber direction , caused by differences in substrate size Jingwei direction changes ; due to shear . Residual shear stress caused in the substrate , once rele...
PCBWay
Jan 09,2014
836 views
With increasingly sophisticated consumer electronics products , such products as circuit boards with increasingly sophisticated consumer electronics products , such as products containing PCB boards a...
PCBWay
Jan 09,2014
690 views
| Ranking | Name | Answers |
|---|---|---|
| 1 | PCBWay Team | 6 |
| 2 | Engineer | 1 |
| 3 | Stephen Newport | 1 |
