Product Description
240x240, 1.3inch IPS LCD display HAT for Raspberry Pi
Overview
This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x240 pixels, with embedded controller, communicating via SPI interface.
Trying to add a control interface for your Pi? This compact display would be the ideal choice.
Features
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- IPS screen, wide viewing angle, better display
- High definition in small size
- 1x joystick, 3x pushbuttons, handy and useful
- Comes with development resources and manual (examples for Raspberry Pi)
Specifications
- Driver: ST7789
- Interface: SPI
- Display color: RGB, 65K color
- Resolution: 240x240
- Backlight: LED
- Operating voltage: 3.3V
Interface
Dimensions
Development Resources
Wiki : www.waveshare.com/wiki/1.3inch_LCD_HAT
Shipping list:
- 1.3inch LCD HAT x1
- RPi screws pack (2pcs) x1
1
2
- Comments(1)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard$19.00 or 1900 BeansRedeem Now
-
PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard$7.00 or 700 BeansRedeem Now
-
-
-
-
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$5.00 or 500 BeansRedeem Now
-
-8%RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.00 or 400 BeansRedeem Now
-
RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD$9.89 or 989 BeansRedeem Now
-
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4$13.00 or 1300 BeansRedeem Now
-
-
-
HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping$17.00 or 1700 BeansRedeem Now