CM4 Maker Board
Description
Seeking for the ideal carrier board for your Raspberry Pi Compute Module 4 (CM4)? Introducing the CM4 Maker Board.
Optional: Raspberry Pi CM4 board & coin cell battery.
What is the Raspberry Pi Compute Module 4?
Compute Module 4 is officially launched on 19th October 2020, and there are 32 variants of the module to choose from.
The Raspberry Pi Compute Module 4 (CM4) and Compute Module 4 Lite (CM4Lite) are loosely based on the Raspberry Pi 4 Model B. The CM4 has an option for cost-sensitive applications to be supplied without the eMMC fitted; this version is called the CM4Lite. The form factor of the new CM4 and CM4L is different from previous Compute modules, which have all shared a form factor. The change is due to the addition of new interfaces; a second HDMI, PCIe, and Ethernet. The addition of these new interfaces, especially PCIe, would not have been possible while preserving the older form factor. Instead, the electrical interface of the CM4 is via two 100-pin high-density connectors. While the switch to a newer form factor has allowed a reduction in the footprint. The total footprint of the CM4, including the socket, is smaller with the new form factor design.
Features
What's on the Board?
10x GPIO LED
1x microSD Card Slot
1x CSI Camera Port
1x DSI Display Port
5x Grove Ports
2x GPIO Ports (GPIO 5, 6 & 23, 24)
1x PWM Port (GPIO 12, 13)
1x UART Port (GPIO 14, 15)
1x I2C Port (GPIO 2, 3)
1x Maker Port (JST-SH 4-Ways Connector)
3x User Buttons
1x Analog Audio Out
1x Piezo Buzzer
1x Buzzer Mute Switch
2x Power Buttons
1x RTC Battery Holder
1x PCF85063A RTC
(Note: DSI & CSI are prohibited when using RTC)
1x External Power Button Header
1x Boot Switch
1x M.2 Connector
2x M.2 Mounting Hole
1x USB-C
1x HDMI
4x USB 2.0 Host
1x Gigabit Ethernet
1x CM4 Socket
GPIOs Breakout
1x DC Power Jack
4x Status LEDs
Click to view larger image.
- Comments(0)
You might like
-
-
Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard$19.00 or 1900 BeansRedeem Now -
PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard$7.00 or 700 BeansRedeem Now -
-
-
-
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$5.00 or 500 BeansRedeem Now -
-8%
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.00 or 400 BeansRedeem Now -
RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD$9.89 or 989 BeansRedeem Now -
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4$13.00 or 1300 BeansRedeem Now -
CM4 Maker Board
-19%In Stock
