Product Description
PI-232 RPI HAT
The RS232 HAT from WisdPi is a Serial communication HAT designed for use with the Raspberry Pi.
Features：
- Serial Interfact HAT for the Raspberry Pi A+/B+/2/3/4
- HAT Compliant (No EEPROM)
- Male DB9 Socket (RS232 / RS-232)
- ST3232 IC
- TX/RX/GND Solder Points
Electrical Characteristics：
- ESD protection for RS-232 I/O pins
- ±15 kV human body model
- ±8 kV IEC 1000-4-2 contact discharge
- 300μA supply current
- 250 kbps minimum guaranteed data rate
- 6 V/μs minimum guaranteed slew rate
- Meet EIA/TIA-232 specifications down to 3 V
How To Use
Step 1:
Connect the Hat board to the GPIO pins of the Raspberry Pi.
Step 2:
Use RS232 just like a common Raspberry Pi UART.
Outline Dimensions
- 65x62.5x25.7mm
PACKAGE CONTENT
- Pi-232 HAT x 1
- Screwdriver x 1
- Screws pack x 1
- Quick Start x 1
- Comments(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard$19.00 or 1900 BeansRedeem Now -
PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard$7.00 or 700 BeansRedeem Now -
-
-
-
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$5.00 or 500 BeansRedeem Now -
-8%
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.00 or 400 BeansRedeem Now -
RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD$9.89 or 989 BeansRedeem Now -
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4$13.00 or 1300 BeansRedeem Now -
