PCBWay GNP-RP01 PoE+ RPI HAT
RasPoE+
Model: GNP-RP01
Tiny small PoE+ expansion board For Raspberry Pi 5. 802.3AT 3KV isolated 5.1V/4.5A
The RasPoE+ (GNP-RP01) is a 802.3af/at-compliant PoE+ accessory for the Raspberry Pi 5. By using this small board and some 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
Features:
· Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 5
· PoE (Power Over Ethernet) capability,IEEE 802.3af/at-compliant
· Fully isolated switched-mode power supply (SMPS)
· Fully open design compatible with Raspberry Pi Active Cooler.
Specifications:
PoE power input: 37V ~ 57V
Power Output GPIO header: 5V 4.5A (MAX)
Dimensions: 56.5 x 65.0mm
Network standard: IEEE 802.3af/at PoE
Isolated: 3KV
Install:
1. Insert the two included PC104 headers from the bottom of the RasPoE+.
2. Then screw the RasPoE+ on Raspberry Pi 5.
Raspberry Pi Setup:
- Update bootloader:
sudo rpi-eeprom-update -a
sudo reboot
- Remove the 3A limitation
sudo rpi-eeprom-config --edit
- add this line:
PSU_MAX_CURRENT=5000
Documentations
- Comments(3)
You might like
-
-
Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard$19.00 or 1900 BeansRedeem Now
-
PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard$7.00 or 700 BeansRedeem Now
-
-
-
-
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$5.00 or 500 BeansRedeem Now
-
-8%RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.00 or 400 BeansRedeem Now
-
RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD$9.89 or 989 BeansRedeem Now
-
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4$13.00 or 1300 BeansRedeem Now
-
-
-
HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping$17.00 or 1700 BeansRedeem Now