esp32s2Stick
esp32s2Stick is a USB device based on the esp32-s2 chip by Espressif.
Thanks to the presence of an USB OTG interface, it is possible to program the chip to act as a USB peripheral (mass storage device, CDC...) and to upgrade the firmware through USB (DFU, Device Firmware Upgrade).
In addition to the basic circuit needed to run the WROVER module, esp32s2Stick offers an RGB LED and a socket for MicroSD cards.
A debug port, connected to the chip serial interface, is also available.
In the github repository you can find all the documentation and some Arduino sketches that explain how to control the LED and how to read the SD card.
esp32s2Stick
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(6)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Luca Dentella
-
SoundShield
SoundShield This is an Arduino shield designed to implement a DCC Accessory Decoder to play audio tr...
-
ServoDecoderShield
ServoDecoderShieldThis is an Arduino shield designed to implement a DCC Accessory Decoder for servos...
-
CDU (Capacitor Discharge Unit)
This board was designed for those who has a power supply that cannot provide enough current to move ...
-
PointMotorBoard
This board, based on the L293D H-Bridge, can interface up to 2 point motors to Arduino.It was design...
-
MosfetBoard
MosfetBoard is a simple board, with 2 logic-level MOSFETs (IRL530) to control with Arduino a model r...
-
Loconet interface
Loconet interfaceLoconet is a bus to control digital model railways.Using this interface, it is poss...
-
esp32s2Stick
esp32s2Stick is a USB device based on the esp32-s2 chip by Espressif.Thanks to the presence of an US...
-
DCC BoosterBoard
BoosterBoard has been designed for my "DCC model railway with Arduino" tutorial. The goal is to offe...
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
162 1 1 -
-
