Luca Dentella
ITALY • + Follow
Tools, APP Software Used etc.
|
EagleAutodesk
|
Description
ServoDecoderShield
ServoDecoderShield
This is an Arduino shield designed to implement a DCC Accessory Decoder for servos.
It can drive up to 16 servos, using a PCA9685 expansion board.
You can easily program servo positions and speed using the onboard LCD display and buttons (or - more traditionally - writing CVs).
Thanks to the code, it can drive servos simultaneuosly: no need to wait between a turnout command and the following one!
The project is opensource: you can download, modify, improve it!
Code
https://github.com/lucadentella/arduino-dcc-turnout-decoders
Schematic and Layout
https://github.com/lucadentella/arduino-dcc-turnout-decoders
Jun 02,2023
1,949 views
end-flag
ServoDecoderShield
Arduino shield for a DCC Servo Accessory Decoder
1949
2
8
Published: Jun 02,2023
Download Gerber file 64
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(8)
- Likes(2)
More by Luca Dentella
-
CDU (Capacitor Discharge Unit)
This board was designed for those who has a power supply that cannot provide enough current to move ...
-
PointMotorBoard
This board, based on the L293D H-Bridge, can interface up to 2 point motors to Arduino.It was design...
-
MosfetBoard
MosfetBoard is a simple board, with 2 logic-level MOSFETs (IRL530) to control with Arduino a model r...
-
Loconet interface
Loconet interfaceLoconet is a bus to control digital model railways.Using this interface, it is poss...
-
esp32s2Stick
esp32s2Stick is a USB device based on the esp32-s2 chip by Espressif.Thanks to the presence of an US...
-
DCC BoosterBoard
BoosterBoard has been designed for my "DCC model railway with Arduino" tutorial. The goal is to offe...
-
SoundShield
SoundShield This is an Arduino shield designed to implement a DCC Accessory Decoder to play audio tr...
-
ServoDecoderShield
ServoDecoderShieldThis is an Arduino shield designed to implement a DCC Accessory Decoder for servos...
-
CDU (Capacitor Discharge Unit)
This board was designed for those who has a power supply that cannot provide enough current to move ...
-
PointMotorBoard
This board, based on the L293D H-Bridge, can interface up to 2 point motors to Arduino.It was design...
-
MosfetBoard
MosfetBoard is a simple board, with 2 logic-level MOSFETs (IRL530) to control with Arduino a model r...
-
Loconet interface
Loconet interfaceLoconet is a bus to control digital model railways.Using this interface, it is poss...
-
esp32s2Stick
esp32s2Stick is a USB device based on the esp32-s2 chip by Espressif.Thanks to the presence of an US...
-
DCC BoosterBoard
BoosterBoard has been designed for my "DCC model railway with Arduino" tutorial. The goal is to offe...
-
SoundShield
SoundShield This is an Arduino shield designed to implement a DCC Accessory Decoder to play audio tr...
-
ServoDecoderShield
ServoDecoderShieldThis is an Arduino shield designed to implement a DCC Accessory Decoder for servos...
-
CDU (Capacitor Discharge Unit)
This board was designed for those who has a power supply that cannot provide enough current to move ...
-
PointMotorBoard
This board, based on the L293D H-Bridge, can interface up to 2 point motors to Arduino.It was design...
-
MosfetBoard
MosfetBoard is a simple board, with 2 logic-level MOSFETs (IRL530) to control with Arduino a model r...
-
Loconet interface
Loconet interfaceLoconet is a bus to control digital model railways.Using this interface, it is poss...
You may also like
-
Modifying a Hotplate to a Reflow Solder Station
221 0 3 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
173 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
434 4 1 -
How to measure weight with Load Cell and HX711
441 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
548 0 0
Hi, the negative goes to the outside and the positive to the display
Hello Luca, thanks for that, im sure if I had more electronic knowledge I would have been able to work it out, but alas I dont. Thanks once again for all these brilliant projects!
Hi, I'm still testing it, as soon as it is working properly, I'll update this page and publish a youtube video with all the details, stay tuned ;)
Hi! The github page has been updated with all the information you need to build the shield. A youtube tutorial is also available.
Hello, thank you very much for sharing, just one more small problem, I could not put the library servoshiekd.h in IDE arduino.
Hi, I'm answering the same question on youtube, let me know if that works for you