Jared NearFarMedia's Profile - Engineer - PCBWay Community

Jared NearFarMedia

https://www.youtube.com/c/nearfarmedia

Recommended

This PCB will let you convert a Dallas DS1230 non-volatile SRAM chip to an FRAM chip that does not require backup batteries.You can use any FM18W08 SMD variant, and be sure to use thin circular pin ty...
Dallas DS1230 to FRAM FM18W08 adapter
12500
This PCB will let you convert a Dallas DS1220 non-volatile SRAM chip to an FRAM chip that does not require backup batteries.NOTE: You will not be able to program this chip in many chip programmers due...
Dallas DS1220 to FRAM FM16W08 adapter
10800
This is a lever to add to male BNC connectors to make connecting things like test fixtures to your instruments easier.Often seen on test fixtures for LCR meters. These are a press fit on BNC's with a ...
BNC Connector Lever
39000
This is a reproduction of the 3GHz input option (Option 030) to suit the HP 53131A, 53132A and 53181A Universal counters.Assembly is straightforward SMD stuff. Just be sure to get the ribbon cable ass...
HP 53131A, 53132A, 53131A 3GHz Input Option 030
65500
Range Switch PCB for Project Tektronix TM500 Mainframe Tester 067-1201-99Note from PCBWay: This project includes 4 kinds PCB. Due to the system, the default order is the Range Switch. If you need the ...
Tektronix TM500 Mainframe Tester 067-1201-99——Range Switch PCB
62100
Front Panel PCB for Project Tektronix TM500 Mainframe Tester 067-1201-99Note from PCBWay: This project includes 4 kinds PCB. Due to the system, the default order is the Front Panel PCB. If you need th...
Tektronix TM500 Mainframe Tester 067-1201-99——Front Panel PCB
52800
Face Plate for Project Tektronix TM500 Mainframe Tester 067-1201-99Note from PCBWay: This project includes 4 kinds PCB. Due to the system, the default order is the face plate. If you need the other th...
Tektronix TM500 Mainframe Tester 067-1201-99——Face Plate
56500
This flat flex PCB is a direct replacement for the front panel on the Tektronix THS700 series portable scopes.See the video here:https://youtu.be/ajKtOf3kfuwThe original part is easy to damage as the ...
Tektronix THS710, THS720, THS730 series oscilloscope button flat flex
82621
This is a replacement for the A21 Voltage Controlled Oscillator board mounted to the acquisition board in Tektronix TDS500 series oscilloscopes. (It may be used in other scopes such as the TDS600 seri...
Tektronix TDS500 Oscilloscope A21 VCO Board
99501
This is a replacement PCB for the Tektronix TM503 mainframe.THIS IS JUST THE FRONT PLATE!Don't forget to order the actual PCB too! You'll need it for the actual circuit.https://www.pcbway.com/project/...
Tektronix TM503 Replacement PCB - FRONT PANEL
78601
This is a replacement PCB for the Tektronix TM503 mainframe.Parts substitutions are allowed, there is nothing critical here, if it is the correct value and it fits, it sits.Also attached is a diagram ...
Tektronix TM503 Replacement PCB
85800
This is a direct replacement for the plastic front plate in the late model Tektronix SG503 Levelled Sine wave Generator.It bolts directly in place with no other modifications except the inner aluminiu...
Tektronix SG503 Front Plate
67301

1 2 3

The PCBWay that recognize the talent and effort of the best ELECTRONIC designers in the World.

© COPYRIGHT 2019

About us
Contact us
Follow us on