Jared NearFarMedia
JAPAN • + Follow
Description
BNC Connector Lever
This is a lever to add to male BNC connectors to make connecting things like test fixtures to your instruments easier.
Often seen on test fixtures for LCR meters. These are a press fit on BNC's with a diameter of 14mm at the knurled portion.
I suggest getting them 3D printed in resin (I used 'standard white material (UTE 8360)) for best results.
(The two center connectors on the test fixture in the photo simply had the collars removed carefully with a thin saw and pliers).
CAD-Custom parts and enclosures
BNC Lever
BNC Lever.stp
Apr 07,2024
251 views
BNC Connector Lever
Levers to add to your BNC connectors on test fixtures, perfect for LCR meters and the like.
251
0
0
Published: Apr 07,2024
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-ShareAlike (CC BY-NC-SA)
License.
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Jared NearFarMedia
-
BNC Connector Lever
This is a lever to add to male BNC connectors to make connecting things like test fixtures to your i...
-
Tektronix THS710, THS720, THS730 LED backlight conversion
This is a direct swap-in replacement for the CCFL backlight as used in the THS7xx series scopes.It r...
-
HP 53131A, 53132A, 53131A 3GHz Input Option 030
This is a reproduction of the 3GHz input option (Option 030) to suit the HP 53131A, 53132A and 53181...
-
Tektronix TM500 Mainframe Tester 067-1201-99——Range Switch PCB
Range Switch PCB for Project Tektronix TM500 Mainframe Tester 067-1201-99Note from PCBWay: This proj...
-
Tektronix TM500 Mainframe Tester 067-1201-99——Front Panel PCB
Front Panel PCB for Project Tektronix TM500 Mainframe Tester 067-1201-99Note from PCBWay: This proje...
-
Tektronix TM500 Mainframe Tester 067-1201-99——Face Plate
Face Plate for Project Tektronix TM500 Mainframe Tester 067-1201-99Note from PCBWay: This project in...
-
Tektronix THS710, THS720, THS730 series oscilloscope button flat flex
This flat flex PCB is a direct replacement for the front panel on the Tektronix THS700 series portab...
-
Tektronix TDS500 Oscilloscope A21 VCO Board
This is a replacement for the A21 Voltage Controlled Oscillator board mounted to the acquisition boa...
-
Tektronix TM503 Replacement PCB - FRONT PANEL
This is a replacement PCB for the Tektronix TM503 mainframe.THIS IS JUST THE FRONT PLATE!Don't forge...
-
Tektronix TM503 Replacement PCB
This is a replacement PCB for the Tektronix TM503 mainframe.Parts substitutions are allowed, there i...
-
Tektronix SG503 Front Plate
This is a direct replacement for the plastic front plate in the late model Tektronix SG503 Levelled ...
-
Dallas DS1225Y FRAM Adapter
This PCB will let you convert a Dallas DS1225Y non-volatile SRAM chip to an FRAM chip that does not ...
-
Tektronix DM502 Front Plate
This is a direct replacement for the plastic front plate in the Tektronix SG504.It bolts directly in...
-
Tektronix PG506 Front Plate
This is a direct replacement for the plastic front plate in the early type Tektronix PG506.It bolts ...
-
Tektronix SG504 Front Plate
This is a direct replacement for the plastic front plate in the Tektronix SG504.It bolts directly in...
-
Tektronix TDS500 TDS600 TDS700 Oscilloscope PSU Tester
(Image shown is an older revision)This board is designed to plug directly into the PSU board as used...
-
Tektronix AFG5101 Small Extender Cable - 32-Pin
This is the small adapter cable to allow for calibration and servicing for the Tektronix AFG5101 Arb...
-
Tektronix AFG5101 Large Extender Cable - 64-Pin
This is the large adapter cable to allow for calibration and servicing for the Tektronix AFG5101 Arb...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
156 1 1 -
-
