SUBHAJIT BARMAN
INDIA • + Follow
Description
300W Pure Sine Wave Inverter with EGS002 SPWM Driver Board
This full sinusoidal inverter with EGS002 SPWM driver board can convert the 12V DC to 220V AC with 50/60Hz pure sine wave. 300W Pure Sine Wave Inverter - You can use this inverter to power household appliances during emergency situations when electricity is not available.
Jan 23,2024
2,744 views
end-flag
300W Pure Sine Wave Inverter with EGS002 SPWM Driver Board
Make a full sinusoidal 300W inverter with EGS002 SPWM driver board, which can convert the 12V DC to 220V AC with 50/60Hz pure sine wave.
2744
1
3
Published: Jan 23,2024
Download Gerber file 168
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
File Last Updated: 2024/04/26 (GMT+8)
File update record
2024-04-2610:12:49
Parts List (BOM) is updated.
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial (CC BY-NC)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(3)
- Likes(1)
More by SUBHAJIT BARMAN
-
KY-022 Infrared Receiver Module
The KY-022 module is an infrared receiver that reacts to 38kHz IR light. It can be used to receive c...
-
Simple Peak Detector Circuit Board
A peak detector is an electronic circuit designed to identify and hold the highest value (peak) of a...
-
Arduino Inductance Meter DIY
Make a pocket-sized inductance meter using Arduino, capable of precisely measuring 41uH to 30mH indu...
-
300W Pure Sine Wave Inverter with EGS002 SPWM Driver Board
This full sinusoidal inverter with EGS002 SPWM driver board can convert the 12V DC to 220V AC with 5...
-
Lithium BMS Module For Overcharging Protection
This single Battery Management System (BMS) module can monitor the 1S cell at a maximum current of 1...
You may also like
-
Modifying a Hotplate to a Reflow Solder Station
212 0 3 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
171 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
424 4 1 -
How to measure weight with Load Cell and HX711
439 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
543 0 0
The link given by the author has the BOM and schematic diagram you need.