3D Printable Modular Bluetooth Speaker System
At it’s core is the main speaker - everything is contained in this box including the Lithium Ion batteries, recharging circuit, bluetooth receiver and amp. You'll also find both a standard USB and USB C port to recharge your other devices.
This is where it gets cool though: Assemble the second 'slave' speaker for a louder system and it’s connected as simply as sitting it on-top. Magnets hold it in place and the Pogo pins form the electrical connection.
Why did I design it like this? We’ll you can face the second speaker in the same direction for increased volume, face it sideways for a wider sound stage or back to front for when it’s in the middle of a group.
This also let’s you choose which modules you take with you when you head out from home.
And when it gets later in the evening why not add the funky disco light module on top to light up the evening whilst you listen to tunes? :)
This one is themed after everyone’s favourite plumbers. Don’t worry though, I’ve included an alternative dialled down design should you not care for Italian servicemen.
In the video at the top I’ll explain in detail everything you need to build your own speaker and as a bonus - towards the end of the video I’ll show you how to add the disco light pipe.
BOM
- BMS 3S 60A: https://geni.us/BMC-3S-60A
- CC/CV Buck Converter XL4015 (x1): https://geni.us/XL4015-CC-CV
- Pogo Pins (2mm spring head & 5.5mm shaft length) (x2): https://geni.us/PogoPins75-55
- 3 Cell 18650 Battery Holder (x1): https://geni.us/3s-18650-Holder
- Quality 18650 Lithium Ion Batteries from a reputable source (x3)
- Bluetooth Amp: https://geni.us/Bluetooth-AMP
- Voltmeter / USB PSU (x1): https://geni.us/Voltmeter-with-USB
- DC Barrel Connector (x1): https://geni.us/HighAmpDCBarrel
- Power Switch (x1): https://geni.us/Power-Switch
- 4” Full Range Speakers - They don’t have to be yellow! :) (x1 or 2): https://geni.us/4-Inch-Speakers
- Power supply:
- Magnets (12x3mm): https://geni.us/12x3mmMagnets
- Bolts (M4x5mm) (x??): https://geni.us/M4-Bolts
- Filament: https://www.3djake.uk
- Disco Light: https://geni.us/USB-Disco-Light
3D Printable Modular Bluetooth Speaker System
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(7)
- Engineer Oct 20,2024
- Josue Fernandez Sep 25,2024
- Engineer Jul 08,2023
- Lewis DIYMachines Jun 21,2023
- Engineer Jun 19,2023
- Daan Uttien Jun 18,2023
- Engineer Jun 18,2023
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
10design
-
9usability
-
10creativity
-
10content
More by Lewis DIYMachines
- KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic Today I’ll show you how to create these amazing self-moving Kinetic Coasters.I’ve created loads of d...
- How To Make Neon LED Signs | Low Cost with Alexa, Hue & WiFi Controls I’m Lewis, and this is DIY Machines. The channel where I show you step-by-step how to build your own...
- Hollow Shadow Clock 3D Print and assemble your own Hollow Shadow Clock with amazing projections and magical motions! The...
- 3D Printable Modular Bluetooth Speaker System At it’s core is the main speaker - everything is contained in this box including the Lithium Ion bat...
- Filament Spool Smart Lamp - Hue, MQTT, Alexa & Sound Reactivity - ESP32 & Fusion 360 File Over time I have collected a few empty spools, which, for some reason always seemed too good to just...
- Desktop Neon Effect LED Signs 3D Print your own Desktop Neon LED SignHow to build a dimmable and portable customisable Neon Sign.T...
- Giant Modular Seven Segment Display For a recent project that I was working on I needed a large seven segment display. I could find some...
- WeatherBot - 3D Printable Weather Forecasting Theatre | ESP32 & OpenWeatherMap How to 3D Print / Laser cut an ESP32 WiFi connected Weather Forecasting Theatre with E-ink Display.M...
- GeoLeaf - DIY Smart modular LED Light panels How to build a very smart and low cost geometric lighting system. This project was sponsored by PCBw...
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
90 0 0 -
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
176 1 1