Amiga DrawBridge (Faceplate FA2)
The Amiga DrawBridge was based on a series of articles in Amiga Addict, written by Rob Smith the original creator, and came to the conclusion that it was finally the time to look into backing up my old Commodore Amiga floppy disks. The project you are viewing now isn't that, it's actually just a pretty little faceplate that goes on top of the main project PCB that actually does those things. This is just here to hide a bit of the electronics so that it doesn't look like a bare PCB, meaning you can build your own solution without having it look like you built it at home.
The FA1 faceplate design was put together to look a bit like the old HitSquad releases. Yes, the label looks like it is upside down, just like they were on the original disks. For alternative designs, have a look through my shared projects for all relevant faceplates.
Amiga DrawBridge (Faceplate FA2)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(3)
- astrodoggie Jul 12,2023
- David Hansen Jan 04,2023
- (DIY) C64iSTANBUL Jan 02,2022
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Tor-Eirik Bakke Lunde
- LED Tuning Board If you were to take a look at my shared projects, you'll find that for someone who doesn't actually ...
- BulkyMIDI-32 Extras BulkyMIDI-32 is based on the mt32-pi project, bringing you the all the auditory excellence that was ...
- ZX Interface 2.021 I've grown fond of cartridge formats in my later years, mostly because of the feeling you get by bro...
- MSX Mega Drive Adapter I've been playing around with my MSX computer recently, and as the computer itself supports a two bu...
- C64 Joystick Adapter (Faceplate) A rather stylish looking faceplate to go with the C64 Joystick Adapter, it covers up most of the ele...
- C64 Joystick Adapter I recently bought a Raspberry Pi for use with emulators on modern systems, and so I wanted an easy w...
- CPC464 Joystick Splitter (Faceplate A1) I made a simple joystick splitter for the Amstrad CPC 464 on a simple PCB, so I thought - why not ma...
- CPC464 Joystick Splitter Simple passive device that breaks out the joystick port on the Amstrad CPC 464 computer so that two ...
- Apple 2 Prototyping Card (fullsize) I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
- Apple 2 Prototyping Card (small) I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
- C64 Pi1541-II Faceplate (variant B) The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
- C64 JoyKEY (Sega Master System adapter) With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
- C64 JoyKEY (Atari 7800 adapter) With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
- C64 Pi1541-II Backplate The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
- C64 Pi1541-II Faceplate (variant A) The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
- C64 Pi1541-II Module The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
- Arcade 2040 Over the past few years I've been playing around with building new controllers for both modern and v...
- BulkyModem (Commodore 64/128 UserPort Adapter) This is an adapter for hooking up your BulkyModem or BulkyModem-32 to your Commodore 64/128. It take...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
121 0 0 -
DIY Laser Power Meter with Arduino
171 0 2 -
-
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
162 0 2 -