Arduino Splice "Charcuterie" Board (Nano and Uno)
This printed circuit board (PCB) is designed to allow DIY electronics to be more easily connected to an Arduino microcontroller. Additional linked pads, increased space between pads, and labels allow the user to improve wire management and more easily solder components.
Specific design elements:
1.) 32 GROUND pads to allow for easier connection of large component projects
2.) 3 linked pads for D2-10; A0-A6, RX and TX and the RESET
3.) 4-5 pads for D11-D13
4.) 6 pads for 3.3V, 12 pads for 5V
5.) Labeling and increase spacing between pads
6.) Can manage power/signals between multiple boards if using different pins, to allow for more simplified coding.
Arduino Splice "Charcuterie" Board (Nano and Uno)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Midcrustal Matt
-
8 Component Solderable Breadboard
This circuit board allows the user to solder components (LEDS, inputs, outputs) directly to the boar...
-
Electronics Splice Board for two different LED trees/signals
Two signals for controlling a large array of LEDS. 16 pads for signal 1, and 12-13 pads for signal 2...
-
Arduino Splice "Charcuterie" Board (Nano and Uno)
This printed circuit board (PCB) is designed to allow DIY electronics to be more easily connected to...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
129 0 0 -
DIY Laser Power Meter with Arduino
197 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
174 0 2
