ClimatePlace 3.2
Universal! The developed scheme provides for both the placement of elements on the board and the refusal to use them. For example, you can use only direct digital output for the corresponding device or sensor and independently assemble the executive circuit, or you can place the proposed components on the board - a relay block, optocouplers, transistors, etc., and thus obtain a fully finished project. In addition to direct digital outputs, additional 5V, 3.3V, GND connectors for powering external modules have been added to the board.
ClimatePlace 3.2
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Kas Dim
-
Project Chick 3.2
Project Chick 3.2 by SmartESP.net
-
Project SeedBox 3.2
Project SeedBox 3.2 from SmartESP.net
-
Project Seed 3.2
greenhouse, seedling, incubator
-
ClimatePlace 3.2
Universal! The developed scheme provides for both the placement of elements on the board and the ref...
-
Climate3.2
Universal! The developed scheme provides for both the placement of elements on the board and the ref...
-
ClimatePlaceHard3.1
The board is designed based on the "Climate Control" project and has the following features:Compact ...
-
ClimatePlace3.1
The board is designed based on the "Climate Control" project and has the following features:Compact ...
-
Climate3.1
Universal! The developed scheme provides for both the placement of elements on the board and the ref...
-
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
20 0 0 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
228 4 1 -
How to measure weight with Load Cell and HX711
360 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
495 0 0
