Commodore 1541 floppydrive ieee488-interface
The ieee488 interface is compatible with the Commodore floppy drive 1541 (version with built-in power supply).
The interface changes the serial bus into a parallel ieee488 bus. The Commodore floppy drive 1541 becomes comparable to the Commodore floppy drive 2031. The serial bus no longer works after the conversion. Reading and writing on diskettes is up to 6 times faster.
In addition, an ieee488 ROM is required for the floppy drive 1541 as a replacement for the original ROM 901229-03 on UB4.
Commodore 1541 floppydrive ieee488-interface
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(5)
More by TMO
-
Commodore 1541 floppydrive ieee488-interface
The ieee488 interface is compatible with the Commodore floppy drive 1541 (version with built-in powe...
-
c64-psu-902503-06-austauschplatine rev 0.2.1 with Murata OKX-T/3-D12N-C (RM 2,54)
c64-psu-902503-06-austauschplatinePCB replacement for the Commodore C64 PSU 902503-06Rev 0.2.1: with...
-
c64-psu-902503-06-austauschplatine rev 0.1.3
c64-psu-902503-06-austauschplatinePCB replacement for the Commodore PSU 902503-06Rev 0.1.3: with Mur...
-
C64-PSU-251053-11-Austauschplatine rev 0.3.1
PCB replacement for the Commodore C 64 PSU 251053-11Rev 0.3.1: with Murata OKR-T/3-W12 or Traco TSR ...
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
229 1 3 -
Easy to print simple stacking organizer with drawers
99 0 0 -
-
-
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1177 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
663 0 1 -
UC3 contains the 6522 at the floppy pcb. Place the 6522 at the interface in position row 2 and 4 of UC3.