This module is a comprehensive development board for FPGA + MCU microcontroller.

FPGA part can choose EP4CE6E22C8N or EP4CE10E22C8N of cyclone IV,

can choose FPGA chip model according to design content,

integrate independent key, three LEDs,

50MHz crystal oscillator, TF card, OLED,

TFT, camera interface. FLASH uses EPCQ64A,

FPGA leads all IO ports are not multiplexed,

MCU part uses STC8A8K64S4A12-LQFP48,

integrated independent buttons, three LEDs, OLED,

17 IO ports connected with FPGA,

two chips can use serial Parallel port communication,

suitable for FGPA to process high-speed signals or images.

It should be noted that the large pad on the back of the FPGA needs to be soldered when soldering,

otherwise the program cannot be downloaded.