|
FreeCad |
Handheld Cartridges Storage
Why the "Handheld Cartridges Storage"?
I have a good number of loose retro games for GameBoy and GameGear. I looked online for storage solutions for a while, printing some I also found, but was often, if not always, dissatisfied with them. Printed racks I downloaded pinched the cartrigdes too hard, leaving faint marks on them. What I also wanted was a closed box, to protect cartridges from UV lights. We all have seen yellow or brown Gameboy carts...
So, I finally decided to create my own solution, fitting my needs. And publishing it online was the next logical step, as I'm sure it can fit the needs of other game collectors.
If you want more information, please check a full writeup on Thingiverse or Cults.
Storages are for Nintendo GameBoy, GameBoy Color, GameBoy Advance, DS, 3DS, Switch, and Sega GameGear.
The short version :
You need one box and one drawer to make a storage. Please choose box and drawer according to wanted storage. Should be printed with PLA, 0.4mm nozzle, 0.2mm layers, 40% infill.
Handheld Cartridges Storage
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Keitaro Baka
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
87 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
176 1 1
