Renzo Mischianti
ITALY • + Follow
Edit Project
Description
LoRa remote water level and pump controller: Battery powered client (ReWaL)
Articles
- LoRa remote water tank level and pump controller: intro
- LoRa remote water level and pump controller: server software
- LoRa remote water level and pump controller: client software
- LoRa remote water level and pump controller: server PCB
- LoRa remote water level and pump controller: client PCB
- LoRa remote water level and pump controller: entire server with 3D printed case
- LoRa remote water level and pump controller: entire client with 3D printed case
Problem
First the problem: I must refill a 1,5Km far water tank, so I need two devices:
a server pump manager, that If the remote tank does not start the pump with a relay and when the tank is full, stop the pump.
- Start-stop pump;
- Manage the remote message;
- Prevent dangerous action if the remote device is no more active;
- Monitor to select an operation mode and status.
A client that is in a remote position (tank position) checks the water level and warns the Server if It’s all ok or the tank is full.
- Check the max and min level;
- Warn Server about status;
- Battery and solar-powered;
- Sleep mode if no more need.
Demo video
Messages
Here is a simple communication schema
Water tank level and pump controller LoRa messages.
Apr 13,2022
1,958 views
LoRa remote water level and pump controller: Battery powered client (ReWaL)
I have to fill a tank 1.5 km far away, so I create a 2-part controller. Here is the client part, battery-powered.
1958
2
0
Published: Apr 13,2022
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-NonCommercial-NoDerivs (CC BY-NC-ND)
License.
- Comments(0)
- Likes(2)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
-
Engineer Aug 24,2022
-
Sergio Oliveira Jul 29,2022
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by Renzo Mischianti
-
WeMos D1 (esp8266) Ebyte LoRa shield (10Km) with HardwareSerial and 5V switch HardwareSerial shield 5v versionAfter a while, I understand that to have a good range, I need to pow...
-
WeMos D1 (esp8266) Ebyte LoRa shield (10Km) with HardwareSerial and voltage regulator The new shield is similar but has more features here than the breadboard schema, even if it is limit...
-
Inverter Aurora ABB (Power One) Web Monitor (WIM): server PCB If you have trouble with the price check the Min Track/Spacing, It must be greater or equal than 6/6...
-
Arduino NANO 33 IoT SPI Flash memory shield Like the Arduino MKR WiFi 1010, the NANO 33 IoT doesn’t have Flash memory to store data. I wrote an ...
-
STM32F4 black pill EByte LoRa E32 E22 E220 shield v1.0 Detailed information on my siteFor LoRa E32, LoRa E22 and LoRa E220I start using STM32 microcontroll...
-
STM32F4 Black-pill: WiFi shield (WiFiNINA) STM32F1 Blue-pill: WiFi shield (WiFiNINA)Complete tutorial here.First of all, read the article “STM3...
-
STM32F1 Blue-pill: WiFi shield (WiFiNINA) First of all, read the article “STM32: use WiFiNINA with ESP32 WiFi Co-Processor”, where there are a...
-
STM32F1 blue pill EByte LoRa E32 E22 E220 shield v1.0 Full documentation of the PCBEByte E32 tutorialEByte E22 tutorialEByte E220 tutorialI start using ST...
-
LoRa remote water level and pump controller: Battery powered client (ReWaL) ArticlesLoRa remote water tank level and pump controller: introLoRa remote water level and pump cont...
-
LoRa remote water level and pump controller: Server ArticlesLoRa remote water tank level and pump controller: introLoRa remote water level and pump cont...
-
ESP32 WeMos LOLIN32 EByte LoRa E32, E22 and E220 shield (10Km) Full articleFinally, I’m going to publish my LoRa shield for WeMos LOLIN32. This is one of my prefer...
-
Arduino MKR WiFi 1010 SPI Flash memory shield Arduino SAMD (NANO 33 and MKR): SPI flash memory FAT FSI have a couple of Arduino MKR WiFi 1010, and...
-
WeMos D1 (esp8266) relay shield WeMos D1 3v module relay shield at work main.One of my project’s most used components is undoubtedly...
-
WeMos D1 (esp8266) with pcf8574 multiplexer to manage encoder, buttons or other For fast prototyping, I will create a set of shields for the WeMos D1 mini; the first is a service b...
-
MKS WiFi module This is a simple PCB to create a WiFi module for 3D printer that use MKS Robin Nano v1 mainboard.I t...
-
Ciclop 3D scanner board v1.2 ElectronicI create a board with PTC Resettable Fuse, (1.85A 30V) this simple component protect your ...
-
esp32-wroom-32 esp32-S programming board Full article and specs on my site www.mischianti.orgESP32-wroom-32, esp32-S: flash, pinout, specs an...
-
esp-12 esp-07 (esp8266) programming board You can find detailed information on my site When I went to use esp12 and esp07, and the first probl...
You may also like
-
-
Electronic Enclosure applied for electronic projects
48 0 0 -
Water pump control for irrigation via telegram and esp32
78 0 0 -
-
-
ADS1256 - RP2040 Custom DAQ Front Panel without GPIO
68 0 0 -