You can find detailed information on my site

When I went to use esp12 and esp07, and the first problem was how to put it on the breadboard, luckily I found an adapter developed by tweeto, and that was what I needed, but I would like to make it easier to use, so I redesigned it smaller and added some labels to identify the pins.

Now you can use It directly on the breadboard.

You can find all information on my site www.mischianti.org

Amount Part Type Properties

2 Electrolytic Capacitor package 100 mil [THT, electrolytic]; capacitance 10μF

1 FTDI Basic Programmer voltage 3.3V; tipo Basic

1 ESP 12E pins 22; chip label 8266; variant 12E; editable pin labels false

2 Pushbutton package [THT]

1 Power Jack tipo 5.5mm barrel breadboard friendly

2 Generic female header – 11 pins package THT; form ♀ (female)

6 Generic female header – 1 pins hole size 1.0mm,0.508mm; pins 1; row single; pin spacing 0.1in (2.54mm); package THT; form ♀ (female)

1 Toggle Switch switching circuit SPDT; package THT

4 10kΩ Resistor pin spacing 400 mil; resistenza 10kΩ; package THT

1 Generic male header – 3 pins package THT; form ♂ (male)

1 LD1117V33 voltage 3.3V; package 78xxl; chip LD1117VXX