Simple Electronics
CANADA • + Follow
Description
PCB Fuse Board
Just a simple board - you need fuse holders: https://s.click.aliexpress.com/e/_ActhfU (make sure you get the "mini" style) and some terminal blocks: https://s.click.aliexpress.com/e/_9hxq4w (4 pin) and you're off to the races!
Jul 14,2021
1,487 views
PCB Fuse Board
Just a simple PCB to distribute your power and add fuses!
1487
3
0
Published: Jul 14,2021
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial (CC BY-NC)
License.
- Comments(0)
- Likes(3)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Simple Electronics
-
0-60V Analog Load
Build your own analog load to load up power supplies, drain batteries, limit current, all sorts of t...
-
0-30V Analog Load
Build your own analog load to load up power supplies, drain batteries, limit current, all sorts of t...
-
0-15V Analog Load
Build your own analog load to load up power supplies, drain batteries, limit current, all sorts of t...
-
Relay Board
I was unsatisfied with the generic relay PCBs on the market - so I made my own!You will also need th...
-
A 12-Device USB Charging Station
I have a lot of devices that need relatively low current charging and I don't really have that many ...
-
Holiday Wreath
This Holiday Season, PCBWay sponsored me to make a holiday decoration! The inspiration for this one ...
-
Another Macro Pad!
Yup! I made another one, this time with lights! Cherry MX (and equivalent) mechanical keyboard switc...
-
banana plug power distribution board
A neat little simple PCB to power my godly Riden power supplies!Here is what you will need:Screw Ter...
-
USB Macro Pad
A super easy USB Macro pad using the Arduino pro micro (or compatible) board. This uses 16 Cherry MX...
-
74HC04 | Hex Inverter Logic Chip | Reference Series
Welcome to my reference series on 74HCxx chips! This one is about the quad, 2-input NOR chip, the 74...
-
Fused Switch Board
PCBWay sponsored this video in order for me to demonstrate that simple PCBs can easily help you orga...
-
74HC02 Exploration
Welcome to my reference series on 74HCxx chips! This one is about the quad, 2-input NOR chip, the 74...
-
74HC00 Exploration
Welcome to my reference series on 74HCxx chips! This one is about the quad, 2-input NAND chip, the 7...
-
LED Panel V2
Take a look at my version 2 90+ CRI LED panel! The last panel was much larger and only had 12 leds o...
-
Auto Ringing Doorbell PCB
Just a PCB for combining a PIR and a radar sensor
-
Motion Sensing Light
I designed a PCB to solve a problem I have been having - I have to walk across a dark basement to tu...
-
Uno Transistor Shield
I made a quick and easy (and beginner-practice friendly) shield for Arduino UNO and Mega compatible ...
-
LED Panel with mounting holes
Super easy to build and assemble - if using 100 ohm resistors, you don't even need aluminum backed P...
You may also like
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
90 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
176 1 1
