Description
PS/2 Mouse Adaptor for Atari ST / Amiga
Original Website:http://ataripcb.pl/
Original Link: http://ataripcb.pl/mouse.html
Amiga/Atari ST mouse
Schematics based on: http://atariamiga.free.fr/sourisps2_e.php
Software 1.3 from: http://eab.abime.net/showthread.php?t=66443
Important: You can use PS/2 or USB connector, but only PS/2 mouse will work. Some mouses support both protocols, so if You're lucky, You can find a mouse with USB plug able to work with PS/2 protocol.
Code
Aug 29,2024
79 views
PS/2 Mouse Adaptor for Atari ST / Amiga
PS/2 Mouse Adaptor for Atari ST / Amiga
79
1
0
Published: Aug 29,2024
Download Gerber file 5
BOM(Bill of materials)
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
File Last Updated: 2024/08/29 (GMT+8)
File update record
2024-08-2912:35:24
Gerber file is updated.
2024-08-2912:33:56
Gerber file is updated.
Only PCB
PCB+Assembly
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(1)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
- Engineer Sep 10,2024
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
- Necroware S7-VRM (2024 Version) Original Github: https://github.com/necroware/s7-vrmNecroware's S7-VRMThis project is a Voltage Regu...
- TS2068 Eprom Command Cartridge V2 Original Website: https://gitlab.com/NF6X_Retrocomputing/ts2068cartThis board allows many 28-pin EPR...
- ATARI 800XL 256KB XE compatible QuarterMEG Atari 800XL, XE compatible, for Ataris with C021697 (or C021698), schematics Claus Buchho...
- UNO2SIO V4 BOM:2x 4.7K THT1x 74LS07 THT
- Fujinet V1.6 for 576nuc Original Website: https://fujinetwifi.github.io/WIKI GITHUB: https://github.com/FujiNetWIFI/fujinet-...
- SIO2Dsub for 576nuc Original Website:https://ataribits.weebly.com/576nuc.htmlOriginal Link:: https://ataribits.weebly.co...
- PALburst for 576nuc Original Website:https://ataribits.weebly.com/576nuc.htmlOriginal Link:: https://ataribits.weebly.co...
- Atari 576nuc Original Website:https://ataribits.weebly.com/576nuc.htmlOriginal Link:: https://ataribits.weebly.co...
- Fujinet 1.7.1 Original Website: https://fujinetwifi.github.io/WIKI GITHUB: https://github.com/FujiNetWIFI/fujinet-...
- Fujinet Devkit Shield v1.0 Fujinet Devkit Shield v1.0Original Website: https://fujinetwifi.github.io/WIKI GITHUB: https://githu...
- Atari Turbo Freezer XL Original Website: http://ataripcb.pl/Original Link: http://ataripcb.pl/atari_freezer.htmlMy version ...
- Atari ST Cartridge Original Website: http://ataripcb.pl/Original Link: http://ataripcb.pl/atari_st_cart.htmlMy version ...
- PS/2 Mouse Adaptor for Atari ST / Amiga Original Website:http://ataripcb.pl/Original Link: http://ataripcb.pl/mouse.htmlAmiga/Atari ST mouse...
- Atari 2600 P. Bros. E0 Cartridge Original Website:http://ataripcb.pl/Original Link: http://ataripcb.pl/a2600_parker_cart.htmlMy versi...
- ZXPicoJoy Programmable Joystick Interface for the ZX Spectrum ORIGINAL GITHUB: https://github.com/TomDDG/ZXPicoJoyProgrammable Joystick Interface for the ZX Spect...
- RA Cart / ECI Extender V1.0 Full ECI and Cart RA orientation.BOM:1x Card Edge Connector 7x2P 2.54mm 240-141x Card Edge Connector...
- RA XE / XL Cart Extender Simple RA orientation of the cartridge slot.BOM:1 x Card Edge Connector 15x2P 2.54mm 240-30
- XE SuperCart 128 Atari Super XE Cart 128KB Cartridge for Atari 8 Bit Computers.
You may also like
-
-
-
LED strip PWM/RGB cascadable controller
24 0 0 -
-
-