The solution supports 1 standard TYPEA and 1 TYPEC (page limitation) socket as output, both support QC3.0 / QC2.0 / FCP / PE2.0 / PE1.1 / SFCP fast charge output. (TYPEC no input function can not be used as charging)

Support TYPEA and TYPEC to discharge externally at the same time,

at this time the output voltage is 5V.

1 TYPEB interface charging input, support high voltage input. 

The charging current is set according to the fast charging input voltage. 

When it is at an ordinary 5V input voltage, the charging current is set to 2.5A;

when it is at a fast charging input voltage, the charging current is set to 4A.

Support 5 LED lights for power indication, and 1 fast charge LED indicator.

The battery type can be set via BSET / HLEDPin.

(4.2V floating by default)

When floating, set 4.2V battery;

When connecting a 62KΩ resistor to ground, set a 4.35V battery;

When connecting a 30KΩ resistor to ground, set a 4.4V battery;

When connecting a 10KΩ resistor to ground, set a 4.3V battery.