If you have a stripped screw hole on your GBA cart case and you don't want to replace the case or transfer the label, then this simple 1-minute print could be for you!

This a replacement hole that can be glued in place of the damaged hole. Here we have a damaged stripped hole... or thread. So, let's fix it

You'll have to cut and remove the original hole.

Then you can superglue the new hole into place. I recommend using Loctite.

Before the glue dries I suggest closing the case up so that you can align the new hole. Once you have it aligned, carefully take it back apart so that the glue can better air dry. All that's left now is to screw it together! The plastic is soft enough to allow for the screw to thread into it but strong enough to hold!