Faruk Soares Correia
MOZAMBIQUE • + Follow
Components
|
|
Micro-Fit 3.0 430452009 |
x 1 | |
|
|
2pin XH2.54 |
x 4 | |
|
|
3pin XH2.54 |
x 2 | |
|
|
4pin XH2.54 |
x 1 | |
|
|
2pin KF301 |
x 1 |
Description
Extruder PCB
Use long screws and spacers to attach the PCB to the back of your extruder stepper, use a 20 pin molex microfit and XH2.4 connectors.
You can find the mount here https://www.thingiverse.com/thing:4078659.
CAD-Custom parts and enclosures
BLTouch_Mount.STL
Extruder_Mount.STL
Layer_Fan.STL
Jan 02,2020
4,661 views
Extruder PCB
Use Micro-fit 20pin connectors.
4661
7
2
Published: Jan 02,2020
Download Gerber file 74
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
File Last Updated: 2024/07/03 (GMT+8)
File update record
2024-07-0312:02:13
Parts List (BOM) is updated.
2023-05-1209:53:11
CAD or technical drawing file is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(2)
- Likes(7)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Faruk Soares Correia
-
RGBW 5V/4W Addressable LED TM1814 Chip
A small PCB for addressable 4W RGBW LED 5V input with TM1814 Chip, can be used to create color chang...
-
ESP32 Starlight Ceiling Board for ESPHOME and WLED
Use a ESP32 Devkit-C, to drive 2 RGBW connections, an Addressable LED, a spot for a I2S Microphone a...
-
NodeMCU32 Shield
This board is for a NODEMCU32, you should be able to add pull down or pull up resistors for the GPIO...
-
Extruder PCB
Use long screws and spacers to attach the PCB to the back of your extruder stepper, use a 20 pin mol...
You may also like
-
-
Micro Planck - 3D Printable Low Profile Mechanical Keyboard
164 1 0 -
Corazon LED intermitente
54 0 0 -
-
