|
KiCADKicad
|
Vampire 4 Mini-ITX I/O Board
This is a simple, modular and inexpensive mini-ITX I/O Board for the Vampire 4 Standalone from Apollo Computer.
It allows you to easily mount the Vampire 4 in any mini-ITX case. The Ports for Mouse and Joystick (DB9 and USB) will be redirected to the back. The I/O Board supports also a 5.25" connector to power a harddrive or optical drive (requires 12V or ATX PSU).
Power Supply
To power the Vampire 4 the I/O Board will give you 3 options:
- using the default USB PSU
- using a 12V PSU
- using an ATX PSU
Be aware! Only power your Vampire 4 from 1 of these options!
External 12V PSU
If you want to use an external 12V PSU you will need 2 additional modules which needs to be installed on the I/O Board.
Pololu PO2851
5V, 5A Step-Down Voltage Regulator D24V50F5
Pololu PO2808
Mini Pushbutton Power Switch with Reverse Voltage Protection
Line Out
For optional audio output there is a connector for a PCM5102 based module.
Support
Want to Support my work? Feel free to Donate!
Disclaimer
Currently it is a Work-In-Progress and it might have issues. Use at your own risk!
If you want to help and build it please report any issues you found.
Vampire 4 Mini-ITX I/O Board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(6)
- Likes(4)
More by AMIGAworld
-
Amiga Flash ROM Adapter V1 (40 Pin)
Amiga Flash ROM Adapter (40 Pin Version) for using up to 4 different Kickstart ROM Versions on any A...
-
SD FFC/FPC Adapter
This is a simple SD to FFC/FPC Adapter (15 Pin, 0.5mm Pitch). It was made for the Amiga 1200 MultiPo...
-
microSD FFC/FPC Adapter
This is a simple microSD to FFC/FPC Adapter (15 Pin, 0.5mm Pitch). It was made for the Amiga 1200 Mu...
-
MultiPort V9 for Amiga 1200
MultiPort Module for the Amiga 1200 providing1x HDMI for Vampire, PiStorm or similar1x microSD for V...
-
MultiPort V8 for Amiga 1200
MultiPort Module for the Amiga 1200 providing1x VGA for Indivision Mk1, Mk2cr or Mk31x microSD for V...
-
MultiPort V7 for Amiga 1200
MultiPort Module for the Amiga 1200 providing1x HDMI for Indivision Mk2cr or Mk31x microSD for Vampi...
-
MultiPort V6 for Amiga 1200
MultiPort Module for the Amiga 1200 providing1x HDMI for Indivision Mk2cr or Mk32x USB Header for Su...
-
MultiPort V5 for Amiga 1200
MultiPort Module for the Amiga 1200 providing 1x HDMI for Indivision Mk2cr or Mk3, 2x USB Header for...
-
MultiPort V4 for Amiga 1200
MultiPort Module for the Amiga 1200 providing 1x VGA for Indivision Mk1, Mk2cr or Mk31x HDMI for Vam...
-
MultiPort V3 for Amiga 1200
MultiPort Module for the Amiga 1200 providing 1x VGA for Indivision Mk1, Mk2cr or Mk32x USB Header f...
-
MultiPort V2 for Amiga 1200
MultiPort Module for the Amiga 1200 providing 1x VGA for BVision or ScanPlus AGA 2x USB Header for S...
-
MultiPort V1 for Amiga 1200
MultiPort Module for the Amiga 1200 providing 1x HDMI for Vampire, PiStorm or similar1x Ethernet Hea...
-
Amiga Flash ROM Adapter V1 (42 Pin)
Amiga Flash ROM Adapter (42 Pin Version) for using up to 4 different Kickstart ROM Versions on any A...
-
Vampire 4 Mini-ITX I/O Board
This is a simple, modular and inexpensive mini-ITX I/O Board for the Vampire 4 Standalone from Apoll...
-
ENC28J60 Ethernet Module
This is a SPI Ethernet Module based on the ENC28J60 chip by Microchip Technology Inc.I decided to bu...
-
Amiga 600/1200 RF Module V2
This is a small replacement PCB for the RF Modulator found in the Amiga 600 and the Amiga 1200 (also...
-
Amiga 600/1200 RF Module V3
This is a small replacement PCB for the RF Modulator found in the Amiga 600 and the Amiga 1200 (also...
-
Amiga 600/1200 RF Module V1
This is a small replacement PCB for the RF Modulator found in the Amiga 600 and the Amiga 1200 (also...
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
