|
Altium DesignerAltium Designer
|
ZX Nuvo 128 Issue 4A
This is a ZX Specrum Clone base on Harlequin by Chris Smith (http://www.zxdesign.info/harlequin.shtml). PCB is the same size as original ZX Spectrum, can be fit in 48K or 48K+ case.
-PCB current version is 4A, support 48K, 128K, 128K +2A/+3/+3E ROM
-Support ALL RAM mode, you can run CP/M with this board when using with floppy disk interface
-DivMMC SD Card Interface on board
-Flash ROM 29F040/39SF040 (upto 8 banks of 64K, select by dip switch)
-Video signal is ZX Spectrum 128K timing
-AY-3-8910 sound chip (Issue 5 can use either AY-3-8910 or AY-3-8912)
-Kempston Joystick port
-Header for WiFi Module
-Composite and RGB PAL output
-Use standard ZX Spectrum Adapter, 9V with center pin negative (-)
ZX Nuvo 128 Issue 4A
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(7)
- Likes(9)
More by Don Superfo
-
ZX Max +3 Issue 1
This is a ZX Spectrum +3 Clone base on CLPD EPM7128S. The ULA implement is base on "ULA chip for ZX ...
-
ZX Max +2A Issue 1A
This is a ZX Spectrum +2A Clone base on CLPD EPM7128S. The ULA implement is base on "ULA chip for ZX...
-
ZX Nuvo 128 Issue 4A
This is a ZX Specrum Clone base on Harlequin by Chris Smith (http://www.zxdesign.info/harlequin.shtm...
-
ZX Max 128 Issue 2B
ZX Max 128 Issue 2BThis is a ZX Spectrum 128 Clone base on CLPD EPM7128S. The ULA implement is base ...
-
Superfo Harlequin 128 Issue 4B
Superfo Harlequin 128 Issue 4BThis is a ZX Specrum Clone base on Harlequin by Chris Smith (http://ww...
-
Superfo Harlequin 128 Issue 4A
This is a ZX Specrum Clone base on Harlequin by Chris Smith (http://www.zxdesign.info/harlequin.shtm...
-
ZX Nuvo +3
This is a ZX Specrum Clone base on Harlequin by Chris Smith (http://www.zxdesign.info/harlequin.shtm...
-
Timex Harlequin 2048
This is a Timex Computer 2048 Clone base on Harlequin by Chris Smith (http://www.zxdesign.info/harle...
-
ZX128 Replica
This is a ZX Spectrum 128 replica in the form of ZX Spectrum 48 PCB. It use original ULA or any repl...
-
ZX Nuvo +2A
This is a ZX Specrum Clone base on Harlequin by Chris Smith (http://www.zxdesign.info/harlequin.shtm...
-
ZX Max 128 Issue 3
This is a ZX Spectrum 128 Clone base on CLPD EPM7128S. The ULA implement is base on "ULA chip for ZX...
-
Superfo Harlequin 128 Issue 3H
The ZX Spectrum is an 8-bit personal home computer developed by Sinclair Research. It was first rele...
-
ZX Spectrum Keyboard
ZX Spectrum KeyboardI made this keyboard for using with Superfo Harlequin 128, ZX Nuvo 128, ZX Max 1...
-
Superfo Harlequin 128 Keyboard
I made this keyboard for using with Superfo Harlequin 128 and ZX Nuvo 128. Both are ZX Spectrum clon...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
109 0 0 -
DIY Laser Power Meter with Arduino
160 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
152 0 2 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
548 0 2
