Benjie Jiao
PHILIPPINES, THE • + Follow
Description
(1 of 2) MiniBurst v0.2 - Front Panel
This is the front panel for my MiniBurst v0.2 burst generator for Eurorack modular synthesizers. Make sure to also print the main board.
Oct 28,2024
93 views
(1 of 2) MiniBurst v0.2 - Front Panel
An analog burst generator for Eurorack modular synth
93
0
0
Published: Oct 28,2024
Download Gerber file 1
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Benjie Jiao
-
(2 of 2) MiniBurst v0.2 - Main Board
This is the main board for my MiniBurst v0.2 burst generator for Eurorack modular synthesizers. Make...
-
(1 of 2) MiniBurst v0.2 - Front Panel
This is the front panel for my MiniBurst v0.2 burst generator for Eurorack modular synthesizers. Mak...
-
(2 of 2) MiniOSC v2.1 - Main Board
This is the main PCB for my MiniOSC v2.1 analog oscillator for Eurorack modular synthesizers. Make s...
-
(1 of 2) MiniOSC v2.1 - Front Panel
This is the front panel for my MiniOSC v2.1 analog oscillator for Eurorack modular synthesizers. Mak...
-
EuroPowerBoard v2
This is a busboard for Eurorack synths but with a modification for my own builds.I use 4-pin JST con...
-
EuroPowerBoard
This is a power distribution board I use for my Eurorack synthesizer cases. It uses 10-pin IDC conne...
-
(2 of 2) MiniLFO v1.1 - Main Panel
A super simple 2HP triangle wave LFO for Eurorack modular synth.You can find more info on my website...
-
(1 of 2) MiniLFO v1.1 - Front Panel
MiniLFOA super simple 2HP triangle wave LFO for Eurorack modular synth.You can find more info on my ...
-
SOT2DIP Adapter
A simple SOT-23-6 to DIP-6 adapter for breadboarding with SMT components. In 8x8 panels.Use this wit...
-
(2 of 2) MiniVerb v1.1 - Main Panel
MiniVerb v1.1 - Main PanelThis is the front panel for my Daisy Seed-based Reverb. You can print this...
-
(1 of 2) MiniVerb v1.1 - Front Panel
MiniVerb v1.1 - Front PanelThis is the front panel for my Daisy Seed-based Reverb. You can print thi...
-
(2 of 2) MiniDelay v1.0 - Main Board
A three-knob delay module based on Rene Schmitz' PT2399 delay design. It’s a simple setup with input...
-
(1 of 2) MiniDelay v1.0 - Front Panel
A three-knob delay module based on Rene Schmitz' PT2399 delay design. It’s a simple setup with input...
-
SynthCard: A business-card sized synthesizer module
# SynthCardThis is my business card synth for benjiaomodular.com. It is a working oscillator circuit...
-
euro2breadboard
A simple utility module for connection Eurorack powers supply on to a breadboard for synthesizer dev...
-
MiniVCF v1.1 - A 4HP Voltage Controlled Filter using a diode ladder design for Eurorack modular synth (Part 3/3: Main)
NOTE: This module is part of a three board design. Make sure to print all three PCBs!This build is m...
-
MiniVCF v1.1 - A 4HP Voltage Controlled Filter using a diode ladder design for Eurorack modular synth (Part 2/3: Control)
NOTE: This module is part of a three board design. Make sure to print all three PCBs!This build is m...
-
MiniVCF v1.1 - A 4HP Voltage Controlled Filter using a diode ladder design for Eurorack modular synth (Part 1/3: Front)
NOTE: This module is part of a three board design. Make sure to print all three PCBs!This build is m...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
153 1 1 -
-
