Benjie Jiao
PHILIPPINES, THE • + Follow
Description
(1 of 2) MiniVerb v1.1 - Front Panel
MiniVerb v1.1 - Front Panel
This is the front panel for my Daisy Seed-based Reverb. You can print this using Aluminum or FR4 circuit boards. Make sure to print MiniVerb v1.1 - Main as well!
Feb 02,2023
671 views
(1 of 2) MiniVerb v1.1 - Front Panel
A reverb module for Eurorack synthesizer format based around the Daisy Seed platform.
671
1
0
Published: Feb 02,2023
Download Gerber file 9
PCBWay Donate 10% cost To Author
File Last Updated: 2023/03/01 (GMT+8)
File update record
2023-03-0121:12:14
Gerber file is updated.
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-MIT
License.
Topic
- Comments(0)
- Likes(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Benjie Jiao
-
(2 of 2) MiniBurst v0.2 - Main Board
This is the main board for my MiniBurst v0.2 burst generator for Eurorack modular synthesizers. Make...
-
(1 of 2) MiniBurst v0.2 - Front Panel
This is the front panel for my MiniBurst v0.2 burst generator for Eurorack modular synthesizers. Mak...
-
(2 of 2) MiniOSC v2.1 - Main Board
This is the main PCB for my MiniOSC v2.1 analog oscillator for Eurorack modular synthesizers. Make s...
-
(1 of 2) MiniOSC v2.1 - Front Panel
This is the front panel for my MiniOSC v2.1 analog oscillator for Eurorack modular synthesizers. Mak...
-
EuroPowerBoard v2
This is a busboard for Eurorack synths but with a modification for my own builds.I use 4-pin JST con...
-
EuroPowerBoard
This is a power distribution board I use for my Eurorack synthesizer cases. It uses 10-pin IDC conne...
-
(2 of 2) MiniLFO v1.1 - Main Panel
A super simple 2HP triangle wave LFO for Eurorack modular synth.You can find more info on my website...
-
(1 of 2) MiniLFO v1.1 - Front Panel
MiniLFOA super simple 2HP triangle wave LFO for Eurorack modular synth.You can find more info on my ...
-
SOT2DIP Adapter
A simple SOT-23-6 to DIP-6 adapter for breadboarding with SMT components. In 8x8 panels.Use this wit...
-
(2 of 2) MiniVerb v1.1 - Main Panel
MiniVerb v1.1 - Main PanelThis is the front panel for my Daisy Seed-based Reverb. You can print this...
-
(1 of 2) MiniVerb v1.1 - Front Panel
MiniVerb v1.1 - Front PanelThis is the front panel for my Daisy Seed-based Reverb. You can print thi...
-
(2 of 2) MiniDelay v1.0 - Main Board
A three-knob delay module based on Rene Schmitz' PT2399 delay design. It’s a simple setup with input...
-
(1 of 2) MiniDelay v1.0 - Front Panel
A three-knob delay module based on Rene Schmitz' PT2399 delay design. It’s a simple setup with input...
-
SynthCard: A business-card sized synthesizer module
# SynthCardThis is my business card synth for benjiaomodular.com. It is a working oscillator circuit...
-
euro2breadboard
A simple utility module for connection Eurorack powers supply on to a breadboard for synthesizer dev...
-
MiniVCF v1.1 - A 4HP Voltage Controlled Filter using a diode ladder design for Eurorack modular synth (Part 3/3: Main)
NOTE: This module is part of a three board design. Make sure to print all three PCBs!This build is m...
-
MiniVCF v1.1 - A 4HP Voltage Controlled Filter using a diode ladder design for Eurorack modular synth (Part 2/3: Control)
NOTE: This module is part of a three board design. Make sure to print all three PCBs!This build is m...
-
MiniVCF v1.1 - A 4HP Voltage Controlled Filter using a diode ladder design for Eurorack modular synth (Part 1/3: Front)
NOTE: This module is part of a three board design. Make sure to print all three PCBs!This build is m...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
153 1 1 -
-
