Benjie Jiao
PHILIPPINES, THE • + Follow
Components
|
|
2 x 5 Male Pin Headers |
x 2 | |
|
|
1 x 5 Male Pin Header |
x 1 | |
|
JST XH2.54 3PGeneric
|
x 1 | |
|
|
2 x 5 Pin Shrouded IDC Header |
x 1 | |
|
3mm greenRS COMPONENTS
|
x 2 | |
|
10k 1/4W resistor |
x 2 | |
|
|
MTS-202 Toggle Switch |
x 1 |
Tools, APP Software Used etc.
|
KiCADKicad
|
Description
euro2breadboard
A simple utility module for connection Eurorack powers supply on to a breadboard for synthesizer development.
Versions
v1.1 - Quick fixes (Unverified)
This version fixes issues found in the initial release.
- Fixed spacing for pins.
- Updated footprint for toggle switch to have more allowance on the pin size.
- Swapped position of the toggle switch and the indicator LEDs so the user can have a better view of the LED.
v1.0 - Initial release
This is the first release of the module.
- Issue: Pin spacing a bit off from standard breadboard spacing.
- Issue: Holes for the toggle switch pins were too tight.
Schematic and Layout
Github
https://github.com/benjiaomodular/euro2breadboard/
May 09,2022
1,681 views
euro2breadboard
A simple breadboard adapter for Eurorack power supply cables
1681
0
0
Published: May 09,2022
Download Gerber file 13
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Benjie Jiao
-
(1 of 2) MiniDiv v0.2 - Main Board
This is the main board for my MiniDiv clock divider based on the CD4040 binary counter IC. Make sure...
-
(2 of 2) MiniDiv v0.2 - Front Panel
This is the front panel for my MiniDiv clock divider based on the CD4040 binary counter IC. Make sur...
-
(2 of 2) MiniBurst v0.2 - Main Board
This is the main board for my MiniBurst v0.2 burst generator for Eurorack modular synthesizers. Make...
-
(1 of 2) MiniBurst v0.2 - Front Panel
This is the front panel for my MiniBurst v0.2 burst generator for Eurorack modular synthesizers. Mak...
-
(2 of 2) MiniOSC v2.1 - Main Board
This is the main PCB for my MiniOSC v2.1 analog oscillator for Eurorack modular synthesizers. Make s...
-
(1 of 2) MiniOSC v2.1 - Front Panel
This is the front panel for my MiniOSC v2.1 analog oscillator for Eurorack modular synthesizers. Mak...
-
EuroPowerBoard v2
This is a busboard for Eurorack synths but with a modification for my own builds.I use 4-pin JST con...
-
EuroPowerBoard
This is a power distribution board I use for my Eurorack synthesizer cases. It uses 10-pin IDC conne...
-
(2 of 2) MiniLFO v1.1 - Main Panel
A super simple 2HP triangle wave LFO for Eurorack modular synth.You can find more info on my website...
-
(1 of 2) MiniLFO v1.1 - Front Panel
MiniLFOA super simple 2HP triangle wave LFO for Eurorack modular synth.You can find more info on my ...
-
SOT2DIP Adapter
A simple SOT-23-6 to DIP-6 adapter for breadboarding with SMT components. In 8x8 panels.Use this wit...
-
(2 of 2) MiniVerb v1.1 - Main Panel
MiniVerb v1.1 - Main PanelThis is the front panel for my Daisy Seed-based Reverb. You can print this...
-
(1 of 2) MiniVerb v1.1 - Front Panel
MiniVerb v1.1 - Front PanelThis is the front panel for my Daisy Seed-based Reverb. You can print thi...
-
(2 of 2) MiniDelay v1.0 - Main Board
A three-knob delay module based on Rene Schmitz' PT2399 delay design. It’s a simple setup with input...
-
(1 of 2) MiniDelay v1.0 - Front Panel
A three-knob delay module based on Rene Schmitz' PT2399 delay design. It’s a simple setup with input...
-
SynthCard: A business-card sized synthesizer module
# SynthCardThis is my business card synth for benjiaomodular.com. It is a working oscillator circuit...
-
euro2breadboard
A simple utility module for connection Eurorack powers supply on to a breadboard for synthesizer dev...
-
MiniVCF v1.1 - A 4HP Voltage Controlled Filter using a diode ladder design for Eurorack modular synth (Part 3/3: Main)
NOTE: This module is part of a three board design. Make sure to print all three PCBs!This build is m...
You may also like
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
110 0 0 -
DIY Laser Power Meter with Arduino
162 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
153 0 2 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
554 0 2
