Andrew McMeikan
AUSTRALIA • + Follow
Description
logicBreakout
Designed so I can access logic analyzer pins as a single 10x1 row
could make single sided but have a ground shield on top layer that can optionally be connected with resistor if made double sided
Jan 21,2024
219 views
logicBreakout
2 Layers PCB 14 x 31 mm FR-4, 1.6 mm, 1, HASL with lead, Black Solder Mask, White silkscreen
a 5x2 to 10x1 adapter, suit 8 channel logic analyser
219
0
0
Published: Jan 21,2024
Download Gerber file 0
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-NoDerivs (CC BY-NC-ND)
License.
Topic
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Andrew McMeikan
-
QFN48/QFP48-0.5 to DIP
Could not find a QFP48 to DIP adapter so made this, can link any pins to ground or add pulldowns or ...
-
Mini_eurocard
This is a Euro card style protoboard but short, fits within 100mm x 100mmI 3d Printed a mini Euro ra...
-
logicBreakout
Designed so I can access logic analyzer pins as a single 10x1 rowcould make single sided but have a ...
-
SLG47004V-DIP
A simple adapter board for SLG47004V to DIP, note that both ground pins are connected togetherdecoup...
-
20 key keyboard Matrix
A basic 20 key matrix in a 100 x 100mm PCB, can chain boards together if you want a 40 key matrixdes...
-
Minimal Z180
The goal of this Z180 board is to keep it minimal.Fitting in a 70x100mm PCB it could be made single ...
-
W470812ASP4_ZUSBGerbers
This is still to be tested, wire wrap was good, but there are some differences I need to test. Only ...
-
W470812ASP1_GerbersCartSocket
Still in development , only build if you know whats up.
You may also like
-
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
143 0 0 -
