|
KiCADKicad
|
Minimal Z180
The goal of this Z180 board is to keep it minimal.
Fitting in a 70x100mm PCB it could be made single sided with some links for the home PCB enthusiast.
Ideal for using an FRAM and having a single board computer with very minimal chip count or using the 0.1 inch headers and stacking vertically for an more expanded system.
Once basic testing works (it is so simple, what could possibly go wrong?) I will do a USB program loader board and a few different add ons.
The very basic serial connection may work for you or just use your favourite TTL adapter.
I put a fairly restricted license but would probably open up if you ask.
Minimal Z180
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
More by Andrew McMeikan
-
QFN48/QFP48-0.5 to DIP
Could not find a QFP48 to DIP adapter so made this, can link any pins to ground or add pulldowns or ...
-
Mini_eurocard
This is a Euro card style protoboard but short, fits within 100mm x 100mmI 3d Printed a mini Euro ra...
-
logicBreakout
Designed so I can access logic analyzer pins as a single 10x1 rowcould make single sided but have a ...
-
SLG47004V-DIP
A simple adapter board for SLG47004V to DIP, note that both ground pins are connected togetherdecoup...
-
20 key keyboard Matrix
A basic 20 key matrix in a 100 x 100mm PCB, can chain boards together if you want a 40 key matrixdes...
-
Minimal Z180
The goal of this Z180 board is to keep it minimal.Fitting in a 70x100mm PCB it could be made single ...
-
W470812ASP4_ZUSBGerbers
This is still to be tested, wire wrap was good, but there are some differences I need to test. Only ...
-
W470812ASP1_GerbersCartSocket
Still in development , only build if you know whats up.
-
-
-
TEKTRONIX THS710,THS720,THS730 External Battery Charger with 3D Printed Case
68 1 0
