Epoxy resins which has been deposited onto the surface or edges of the conductive pattern during drilling. Also&nbs...
Materials that form straight chain thermoplastic and thermosetting resins having good mechanical properties and dimensional s...
The damaging admission and trapping of air, flux and fumes; it is caused by contamination and plating.
The electrodeposition of a metal coating on a conductive object. The object to be plated is placed in an ...
The deposition of conductive material from an auto-catalytic plating solution without application of electrical current.
A layer of copper plated on to an insulating or conductive surface of a PCB by chemical reduction, that&...
A series of contacts printed on or near any edge of a printed board and intended for mating with an ...
The distance of a pattern, components, or both, from the edges of the printed board and intended for mating&nb...
A connector (can be gold-plated edge contacts or a series of parallel lines of holes).
The distance of a pattern, components, or both, from the edges of the printed circuit board.
A measurement of the hardness of a non-metal such as rubber, plastic, etc. Also the instrument for such measur...
In wave soldering, the first wave’s multi-directional jet leaves solder on all contacted surfaces, followed by the ...
Within the re-flow process after pre-heat and before peak re-flow temperature wherein volatile materials escape from the...
Coating material in the form of laminated photo-sensitive foils specifically designed for use in the manufacture of ...
Ranking | Name | Answers |
---|---|---|
1 | _ Floppy Lab | 4 |
2 | PCBWay Team | 3 |