The portion of the re-flow soldering process during which the temperature of the solder is raised to a value&n...
Joining components to substrates by placing the parts into solder paste and then melting the paste to achieve ...
A 1 to 1 (1:1) scale pattern which is used to produce one or more printed boards (rigid or flexible) ...
A detectable anomaly, other than a defect, that is reflective of material, equipment, process and/or workmanship variati...
Equipment for making electrical contact between the bare PCB, components or assemblies and the continuity tester. Probli...
A conductive pattern within or bonded to the surface of a base material intended for point-to-point connection of&n...
A sketch that depicts the printed wiring substrate, the physical size and location of electronic and mechanical com...
A document that shows the printed board (rigid or flexible), the separately manufactured components which are to be...
A portion of conductive pattern formed by printing, serving as one part of a contact system.
A component part, such as an inductor, resistor, capacitor, or transmission line, which is formed as part of t...
Circuit where the interconnections between components, terminals, sub-insulating board
A printed circuit board to which discrete components; hardware, and other electronic devices have been attached to ...
Ranking | Name | Answers |
---|---|---|
1 | _ Floppy Lab | 4 |
2 | PCBWay Team | 3 |