Product Description
3-way Relay Expansion Board
Features:
- Based on Raspberry Pi 40pin GPIO interface, it is suitable for Raspberry Pi series motherboards.
- With high-quality relay, it is allowed to access the load: ≤5A 250V AC or ≤5A 30V DC.
- With optocoupler isolation, avoid interference from high-voltage circuit.
- With relay indicator light, it is convenient to check the working state of the relay.
- With relay selection jumper cap, it is convenient to switch other pins of raspberry pie for control.
Introduction to interface
1. Raspberry pigio interface
Convenient access to raspberry pie
2. Relay terminal
Convenient connection to external control line
Patch cord description
3. Relay control pin selection jumper
Short jumper: Connect to the I/O specified by the sample program.
Disconnect jumper wire: You can use connecting wire to access custom I/O instead.
Device introduction
4. Relay
5. Optocoupler
PC817 optocoupler chip
6. Relay working indicator light
The LED is on, the normally closed end of the relay is off, and the normally open end is closed.
LED is off, the normally closed end of the relay is closed, and the normally open end is disconnected.
7. Power indicator light
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard$18.99 or 2280 BeansRedeem Now
-
PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard$6.99 or 840 BeansRedeem Now
-
-
-
-
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.99 or 600 BeansRedeem Now
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.39 or 520 BeansRedeem Now
-
RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD$9.89 or 1200 BeansRedeem Now
-
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4$12.99 or 1560 BeansRedeem Now
-
-
-