Product Description
RP2040-Zero, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, Mini ver.(with pre-soldered header)
Product parameter:
- RP2040 microcontroller chip independently designed by Raspberry Pi was adopted.
- Equipped with dual-core ARM Cortex M0+processor, the operating frequency is up to 133MHz flexible clock.
- Built-in 264KB SRAM and 2MB on-chip Flash
- The real stamp hole design can be directly welded and integrated into the bottom plate designed by users independently.
- 1.1 USB host and device support
- Support low power sleep and sleep mode
- A program that can be identified as a mass storage for drag-and-drop downloading by USB
- 29 GPIO pins of RP2040 are led out (20 pins can be led out by pin array, the rest can only be led out by welding)
- 2 SPI, 2 I2C, 2 UART, 4 12-bit ADC, 16 controllable PWM channels
- Accurate on-chip clock and timer of
- temperature sensor
- On-chip accelerated floating-point library
- Eight programmable I/O (PIO) state machines for customizing peripheral support
- RP2040 microcontroller chip independently designed by Raspberry Pi was adopted.
- Equipped with dual-core ARM Cortex M0+processor, the operating frequency is up to 133MHz flexible clock.
- Built-in 264KB SRAM and 2MB on-chip Flash
- The real stamp hole design can be directly welded and integrated into the bottom plate designed by users independently.
- 1.1 USB host and device support
- Support low power sleep and sleep mode
- A program that can be identified as a mass storage for drag-and-drop downloading by USB
- 29 GPIO pins of RP2040 are led out (20 pins can be led out by pin array, the rest can only be led out by welding)
- 2 SPI, 2 I2C, 2 UART, 4 12-bit ADC, 16 controllable PWM channels
- Accurate on-chip clock and timer of
- temperature sensor
- On-chip accelerated floating-point library
- Eight programmable I/O (PIO) state machines for customizing peripheral support
Resources introduction:
1. USBType-C interface
2. W25Q16JVUXIQ
2MBNOR-Flash, same as Raspberry Pi Pico
3. BOOT button
Press when reset to enter download mode
4. RESET button
5. WS2812
RGB LED
6. ME621
Low dropout LDO, maximum current 800MA
7. RP2040
Dual-core processor, up to 133MHz operating frequency
8. RP2040 pin leads
Lead out 10 pins, 9 of which are GPIO pins lead out
Product size:
Resources & Services
Wiki: RP2040-Zero
- Comments(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard$19.00 or 1900 BeansRedeem Now -
PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard$7.00 or 700 BeansRedeem Now -
-
-
-
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$5.00 or 500 BeansRedeem Now -
-8%
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.00 or 400 BeansRedeem Now -
RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD$9.89 or 989 BeansRedeem Now -
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4$13.00 or 1300 BeansRedeem Now -
Pi HATs & RP2040
RP2040-Zero, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, Mini ver.(with pre-soldered header)
-37%
Product ID: LP447
(Coupon is not available)
In Stock
In Stock
1497
0
US $5.00
US $ 7.99
Quantity:
Exchange
Method:
Cash
Bean
