Product Description
HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping
Features:
- Based on Raspberry Pi 40PIN GPIO interface design, it is suitable for Raspberry Pi series motherboards and Jetson Nano.
- Two on-board DRV8825 motor driver chips with built-in converter are easy to control and can drive two stepping motors.
- Support dip switch to select six different stepping resolutions: full step, half step, 1/4 step, 1/8 step, 1/16 step and 1/32 step.
- Support adjusting the motor drive current through potentiometer, and support up to 2.5A current output.
- Support overcurrent protection, thermal shutdown and undervoltage locking.
- On-board 5V voltage stabilizing chip can directly supply power to raspberry pie.
- On-board multiple stepping motor interfaces facilitate access to stepping motors of different specifications.
Parameter:
- Motor driver chip: DRV8825
- Logic level: 3.3V
- Motor driving voltage: 8.2V~28V
- Product size: 65 × 56mm
- Motor driving current: 2.5A
- Diameter of via hole: 3.0mm
- Applicable motors: SM24240, SM25776, 5V stepping motor (need to be purchased separately)
- Applicable power supply: American standard 9V 2A outer diameter 5.5 inner diameter 2.1 (need to be purchased separately)
Recourse
1. Raspberry pi GPIO interface
Access to various Raspberry pi hats
2. Motor interface
Three different specifications of motor interface, easy to use.
3. MP1482 power chip
External power supply can be converted into 5V voltage to supply power to raspberry pi.
4. DRV8825 motor driver chip
Two stepping motors can be driven
5. External power supply interface
Can input 8.2V~28V DC power supply
6. Motor power switch
Choose whether the module supplies power to raspberry pie.
7. dip switch
Six different stepping resolutions can be set.
8. potentiometer
Adjustable motor drive current
Interface definition
Resources & Services
- Comments(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard$19.00 or 1900 BeansRedeem Now
-
PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard$7.00 or 700 BeansRedeem Now
-
-
-
-
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$5.00 or 500 BeansRedeem Now
-
-8%RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.00 or 400 BeansRedeem Now
-
RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD$9.89 or 989 BeansRedeem Now
-
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4$13.00 or 1300 BeansRedeem Now
-
-
-
HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping$17.00 or 1700 BeansRedeem Now