In a double-layer board circuit, if the top layer is covered with GND and the bottom layer is covered with VCC, how will this copper laying method affect the circuit and is there a simulation solution...
16. Object class manager: DCDC, here you can add the class of PWR, and add the power supply VCC, GND into the member list. Back to the PCB, the top layer to the bottom layer28. CrystalCrys...
As part of a project I undertook, I built a system that includes sensors to monitor certain biomedical parameters. I implemented this whole system with a central microcontroller and various developmen...
Is there a way to not use a spdt switch for turning the controller on and off? I am trying to make it turn on from the steering wheel. I noticed you gave a BOM list. Does it matter on type of res...
I want to make a PCB as one design, but with a part as a 'break-off' section - see the picture with the large slot near the top of the board. The board measures about 130 x 100mm overall.Is this the b...
In the manufacturing industry, after the process designer has designed the PCB, does it need to check the design results? The answer is yes, and there is more than one way to check.The first is DRC in...
We have issue regarding strenght of copper track on substrate. The SMT spacer peels off with copper track after screw fitting. please refer to photo.Request your help on this issue.thanks,AY
