|
fusion360 |
3 channel valve assembly
Full build details available here
I had the Cam Retainer part printed from aluminum (and it came out awesome!), and I printed everything else with FDM. But I had the Cam for the 6 channel version printed SLA, and I think that's the way to go. Although I printed all of mine FDM, I also think the Motor Coupler is a good candidate for printing SLA.
I'd recommend printing the Valve Flexures from PETG or similar material. Definitely steer clear of any brittle materials like PLA for these.
For this build, you'll need one each of all parts except for the Bearing Retainer and Valve Flexures. For those you'll need 3 of each.
For a full list of materials and build instructions, check out the link above.
3 channel valve assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(2)
More by Bubs Builds
-
3 channel valve assembly
Full build details available hereI had the Cam Retainer part printed from aluminum (and it came out ...
-
Thermistor Driver Board
This board was made in support of the below video for getting temperature measurements using some be...
-
8 channel valve assembly
Full build details available hereI had the Cam Retainer part printed from aluminum (and it came out ...
-
6 channel valve assembly
Full build details available hereI had the Cam Retainer part printed from aluminum (and it came out ...
-
High Flow Peristaltic Pump
Build BOMPrinted PartsI printed all of my parts in PETG, from a mixture of SUNLU and Polymaker fila...
-
Displacement Sensor Flexure
As featured on Hackaday: https://hackaday.com/2024/05/18/flexures-keep-this-printed-displacement-sen...
-
Folding Table Leg Hinge
A fellow Printables user recently asked me whether I thought any of my 2020 extrusion hinges would b...
-
Flexure-based Fractal Vise Jaws
OverviewI, like pretty much every engineer I know, was absolutely enamored with the idea of fractal ...
-
Bolt Sorting Sieve Shaker
Every project I work on that includes fasteners seems to end up accumulating a pile of unsorted, ran...
-
Desktop Caliper Stand
A tidy way to keep your calipers handy. These stands were designed to hold 6 inch (150mm) or 8 inch ...
-
Prusa Camera Mount
Original articleLike a lot of people, I love me a 3d printing time lapse. I've experimented with a f...
-
-
-
DIY Transistor Tester | Build Your Own LCR Meter at Home with Arduino Nano
39 0 0 -
-
ESP32-S3 breakout board for motorizing Iron Man helmets
121 0 2 -
-
-
