Top Overlay
Top Solder Mask
Top Copper Layer
Bottom Copper Layer
Bottom
80386EX Adapter Board 50mm x 50mm
### DESCRIPTION
50mm x 50mm Adapter board for the Intel 80386EX high integration CPU. The 386EX is only available as a PQFP-132, and not everyone is comfortable soldering directly to a main board; e.g., the SBC-386 below.
### TECHNICAL DETAILS / COMPONENTS
This board is NOT a general PQFP-132 adapter; power and ground connections are specific to the 386EX chip. 2mm double row headers are used for mounting: qty 4, 2x17 header strips.
### LEARN / TOPIC / BUILD INSTRUCTIONS
This board fits the RetroBrew SBC-386 v. 2.0 and later ECB (100mm x 160mm) single board computer. This adapter is meant for folks who do not want to solder the CPU directly to the main board.
See https://www.retrobrewcomputers.org/doku.php?id=boards:sbc:sbc-386ex:rev2.0
80386EX Adapter Board 50mm x 50mm
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(6)
- Likes(6)
More by JOHN COFFMAN
-
NS32000 Single Board Computer (NS32k)
NS32000 series Single Board ComputerUses the NS32CG160 CPU + peripherals and NS32181 FPU chips.Descr...
-
RetroBrew SBC-188 version 3.2 (80C188 single board computer)
Reference Shared Project "RetroBrew SBC-188v3.1" for detailed information. This revision is the exac...
-
80386EX Single Board Computer
The full documentation for the 2.0 board is here: https://www.retrobrewcomputers.org/doku.php?id=bo...
-
RetroBrew SBC-188 version 3.1 (80C188 single board computer)
The RetroBrew Computers group kicked around the idea of a computer based on the Intel 80C188 chip, a...
-
80386EX Adapter Board 50mm x 50mm
### DESCRIPTION50mm x 50mm Adapter board for the Intel 80386EX high integration CPU. The 386EX is o...
-
Modifying a Hotplate to a Reflow Solder Station
175 0 2 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
128 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
373 4 1 -
How to measure weight with Load Cell and HX711
421 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
531 0 0
The predecessor board was 66mm square (2.6" square) using 2 x 17 connectors (4) with 0.1" pin spacing. It was manufactured at PCBway. I will look for the project and share it, if it is not too old for PCBway.
Welcome to share more projects in our community.
I believe the earlier adapter board Gerber file was "Adapter386EX-mfg.zip" Is this file still in your data base for sharing?
Regarding 386EX, I only found two projects you shared in our community. They are the current project and https://www.pcbway.com/project/shareproject/80386EX_Single_Board_Computer.html. Please check.
Not 100mm x 100mm but 2.6" x 2.6" using 0.1" centers on the 2x17 connectors. Contact me through the RetrobrewComputers Wiki under "boardinventory" near the bottom: http://www.retrobrewcomputers.org/doku.php?id=start