|
|
1117-5 |
x 1 |
Altera EPM7032 EPM7064 breakout board
This board can be used for experimenting with Altera (Intel) CPLDs. Either EPM7032SLC44 or EPM7064SLC44 chips can be used. Do not use other families of chips. 5V LDO regulator of the 1117 series is needed. To build this board I typically use whatever parts are floating around, scavenged from old boards. Any capacitor or resistor close to marked value will work. Values are marked on silkscreen. I use machined pin sockets for oscillator. This way different oscillators can be used as needed.
Video presenting assembly of a bigger version of this board for EPM7128 on YouTube
Altera EPM7032 EPM7064 breakout board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
More by Artur Jasowicz
-
Rotary encoder with 7-segment display and Lattice MachXO CPLD
For those looking for a trickier board to assemble, here's an encoder board with Lattice MachXO CPLD...
-
Rotary encoder with LEDs - through hole version
Through-hole version of my encoder with LEDs projectAny resistors in 200-1000 ohm range can be used ...
-
Rotary encoder and LED breakout board
Breakout board with rotary encoder and 5 LEDs. This can be used for experimenting with digital circu...
-
Altera EPM7032 EPM7064 breakout board
This board can be used for experimenting with Altera (Intel) CPLDs. Either EPM7032SLC44 or EPM7064SL...
-
Altera EPM7128SLC breakout board
This board can be used for experimenting with Altera (Intel) CPLDs. LM317 is optional and only neede...
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
156 1 1 -
-
