AmiKey Connector
Connector for AmiKey PCB membrane for Amiga 1200 computers: AmiKey A500/A1200 and AmiKey A1200.
Please visit project page for more informations: https://8bit.re/amikey/
AmiKey Connector by RetroBox is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Disclaimer
The author is not responsible and cannot be held liable for any damages caused by the use or misuse of this project or products manufactured on its basis. The author does not give any guarantee for the products manufactured on the basis of this project and does not guarantee their correct operation. You use this project as well as products manufactured on its basis at your own risk.
AmiKey Connector
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(1)
- Likes(1)
More by EightBit REcreated
-
AmiKey Connector
Connector for AmiKey PCB membrane for Amiga 1200 computers: AmiKey A500/A1200 and AmiKey A1200.Pleas...
-
AmiKey A500/A1200
AmiKey is a PCB membrane for Amiga computers. It replaces Mitsumi membranes A-500(E)56 A619A and A-5...
-
AmiKey A1200
AmiKey is a PCB membrane for Amiga computers. It replaces Mitsumi membrane A1200-A 56C774A used in A...
-
AmiKey A500
AmiKey is a PCB membrane for Amiga computers. It replaces Mitsumi membranes A-500(E)56 A619A and A-5...
-
Atari PLCC68 Adapter
The Atari ST series computers use PLCC68 sockets which have different pin layout. To get around this...
-
C64 SID Adapter
C64 SID Adapter allows you to use SID 8580 in place of SID 6581 which is normally not possible due t...
-
C64 VIC Adapter
C64 VIC Adapter allows you to use VIC 8565/8562 in place of VIC 6569/6567 which is normally not poss...
-
-
Helium IoT Network Sensor Development board | H2S-Dev V1.2
116 0 0 -
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
181 1 1
