Arc Reactor Pendant
My wife sells jewelry at local markets. I wanted to create my own item to sell. Diffused glowing LEDs behind a PCB with no solder mask cutouts looks awesome. This project uses 2 PCBs, one for LEDs and circuitry and the other for the top that you see. The bottom PCB has the battery holder, circuitry, and LEDs. The 2 pieces are just hot glued together. I had less then a second to get them aligned together before it cooled too much. I created a 3D printed ?align tool to fix this. Takes a CR2450 Battery.
Arc Reactor Pendant
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(3)
Log in to post comments.
More by Seth Baker
-
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
456 1 4 -
-
-
-
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1304 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
736 0 1
