Mirco Gaggiottini Retrofixer
ITALY • + Follow
Description
C64 Light controller
For operation, bom and everything else follow me on GitHub:
https://github.com/zeus074/C64-light-controller
*Please consider subscribing to the channel*
> Thanks for your support!.
Keep in touch:
Schematic and Layout
https://github.com/zeus074/C64-light-controller
Jan 07,2024
599 views
C64 Light controller
PCB to control lights/loads via the Commodore 64 user port.
599
4
0
Published: Jan 07,2024
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(4)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Mirco Gaggiottini Retrofixer
-
C64 Diagnostic and Dead Test
Scheda diagnostica per C64 2 in 1 (Dead Test e Diagnostica)Con questo PCB è possibile inserire anche...
-
Tomy Tutor (Pyuta) Membrane
PCB to replace the Tomy Tutor (Pyuta) membranePrinted with a thickness of 0.6mm even without gold fi...
-
6510 TO 8501
Simple adapter to use the MOS 6510 (C64 processor) as the 8501 (C16 processor).If you use this adapt...
-
C64 Light controller
For operation, bom and everything else follow me on GitHub:https://github.com/zeus074/C64-light-cont...
-
UniRetroRom
With this adapter using a 27C256 you can replace a Commodore Vic20 or 64 breadbin rom (2332 or 2364)...
-
Amstrad GX4000 multicart or CPC464 PULS
Multicart 16 game in 1 for Amstrad GX4000 and CPC464 Plus By Mirco GaggiottiniYou can find the BOM o...
-
Commodore 16 RAM expansion 64Kb solderless on TED
64Kb RAM expansion for C16 C116Adapter to put under the TED to be able to expand the computer memory...
-
27xxx to 2364 or 2332
ROM Adapter 27xxx to 2364/2332 By Mirco GaggiottiniWith this Pcb you can use a 2764 up to 27512 inse...
-
Dram tester for 4116, 4164/256 and 4532 (Original)
Dram Tester V.4.2 By Mirco Gaggiottini (original project)With this Pcb you can make the DRAM memory ...
You may also like
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
153 1 1 -
-
