|
|
ATMega328PU |
x 1 | |
|
|
16 MHz Crystal |
x 1 | |
|
|
22nF capacitor |
x 2 | |
|
|
7-segment display |
x 2 | |
|
|
36 MOhm resistor |
x 5 | |
|
|
10 kOhm resistor |
x 1 | |
|
|
47 kOhm resistor |
x 1 | |
|
|
MAX7219 |
x 1 | |
|
|
Small piezo beeper |
x 1 |
|
EagleAutodesk
|
Capacitive kitchen timer logic board
This PCB is part of the capacitive kitchen timer project featured on my blog. It contains the microcontroller that listens for capacitive inputs and then reacts to them. The MAX7219 seven-segment controller makes sure that the MCU can display the current time on the two seven-segment displays.
If you'd like to build this project, make sure to also order the following two PCBs as all three are required for building this project:
Please Note: I uploaded a new revision of the gerber file! Therefore the images don't match the gerber file anymore.
Capacitive kitchen timer logic board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(1)
More by Dan
-
Universal dual IN-14 Nixie Tube Controller
General descriptionFor a custom thermometer, that uses nixie tubes to display the current temperatur...
-
Universal LCD I2C adapter board
Character LCDs are a fantastic and cost-effective option when your project calls for a user-friendly...
-
Capacitive Touch Timer Input-Ring
This PCB is part of the capacitive kitchen timer project featured on my blog. It serves as the capac...
-
Capacitive kitchen timer logic board
This PCB is part of the capacitive kitchen timer project featured on my blog. It contains the microc...
-
Simple 7805-based 5V regulator for Arduino projects
I'm currently working on a custom Arduino project where I want to employ the Arduino Uno's ATMega328...
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
183 1 3 -
Easy to print simple stacking organizer with drawers
90 0 0 -
-
-
Modifying a Hotplate to a Reflow Solder Station
1161 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
651 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1472 4 3
Hi! Thank you, I used Autodesk EAGLE