Dejan Nedelkovski
NORTH MACEDONIA • + Follow
Description
Custom-built Servo Motor
I design the PCB for this custom-built servo as small as possible, and it came out to be 40x40mm. I position the encoder at the bottom side and exactly at center point of the PCB, so that it can be easily mounted and aligned with the output shaft of the servo.
You can read the full write-up here: https://howtomechatronics.com/projects/how-to-turn-any-dc-motor-into-a-servo-motor/
Sep 30,2023
5,783 views
end-flag
Custom-built Servo Motor
Transform any DC motor into a servo motor.
5783
5
5
Published: Sep 30,2023
Download Gerber file 377
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
Topic
- Comments(5)
- Likes(5)
More by Dejan Nedelkovski
-
3D Printed RC Tank V2
In order to avoid a mess I had to design a custom PCB for my RC tank. The PCB will be compatible wit...
-
Custom-built Servo Motor
I design the PCB for this custom-built servo as small as possible, and it came out to be 40x40mm. I ...
-
3D Printed Tracked Robot Platform (Tank)
I actually ended up with quite a lot of connections, so in order to avoid a mess I had to design a c...
-
Mars Rover
In order to keep the electronics components for the Mars Rover organized I designed a custom PCB. Th...
You may also like
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
172 1 3 -
Easy to print simple stacking organizer with drawers
88 0 0 -
-
-
Modifying a Hotplate to a Reflow Solder Station
1141 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
642 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
1453 4 3
A gerber file is a file containing many layers of information.
Hello, If you're unsure, you can leave it blank for now.