|
|
6*6*6 smd push button |
x 7 |
DIY Button joystick module
I am very fond of using joystick modules in my projects and I generally use analog joysticks. But recently I bought a digital joystick which costs me around $3. After analysing I found that a component which looks like a joystick actually consists of 5 push buttons in a certain manner. So, I decided to build a push button joystick module of my own. I am using the same layout as that of module which I have bought so that you can easily replace that one with the custom build one.
I hope you will like this project as well!!
DIY Button joystick module
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(3)
More by PR ROBOTICS
-
DIY Button joystick module
I am very fond of using joystick modules in my projects and I generally use analog joysticks. But re...
-
BIOAMP EXG PILL controlled CLAW
What is BIOAMP EXG PILL?BioAmp EXG Pill is a small (2.54 X 1.00 cm) and elegant Analog Front End (AF...
-
RGB Snow Man PCB
WISHING YOU MERRY CHRISTMAS 2020To make this project easy to use and manufacture. I haven't used any...
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
39 0 0 -
-
-
-
Sega Master System RGB Encoder Switcher Z80 QSB v1.2
47 0 0 -
18650 2S2P Battery Charger, Protection and 5V Output Board
59 0 0 -
High Precision Thermal Imager + Infrared Thermometer | OpenTemp
360 0 5 -
Sony PlayStation Multi Output Frequency Oscillator (MOFO) v1
117 0 2
