|
|
EasyEDA |
|
|
EagleAutodesk
|
Dev Board for OpenCat Project
This project is designed to use for robotic purposes and based on Arduino Uno with extra features. This is compatible with SD/TF cards, 2.4GHz NRF24 radio modules and Arduino shields. Designed for OpenCat project. It has a high-performance Texas Instruments LMV358-SR voltage regulator and it an drive up to 12 servos, 6 analog sensors and it has extra pins than regular Arduino with most SMD components. This is first revision and there may be mistakes. Did only technical tests via CAD applications and there are no physical samples of this board. It still uses an ATMEL ATMEGA 328P-AU MCU. Sources From :
NRF24 Radio Module:
https://howtomechatronics.com/tutorials/arduino/arduino-wireless-communication-nrf24l01-tutorial/
SD/TF Cards :
https://randomnerdtutorials.com/guide-to-sd-card-module-with-arduino/
Arduino Uno :
https://store-usa.arduino.cc/products/arduino-uno-rev3/documentation/
Dev Board for OpenCat Project
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
8usability
-
8creativity
-
9content
More by Dinul Sasnada
-
Scion V1 - Semi Autonomous Bluetooth Controllable Robot With ESP32 and PCA9685 Servo Driver
This robot was inspired by OTTO Humanoid and the bodywork is bought from Scion Electronics and links...
-
ESP32-WROOM-IE Dev Board
This board is a small form factor ESP32 board that supports all the ESP32 shields. It is one of the ...
-
Dev Board for OpenCat Project
This project is designed to use for robotic purposes and based on Arduino Uno with extra features. T...
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
154 1 1 -
-
